EEC Analyzer Help Needed

04 Mach1 · 02-06-2006, 06:45 PM

Did the data log from the tweecer, pulled it into the datalog page in the analyzer. What is the next step? How do I get the MAF tab to pull up the file so I can see the MAF curve?

QWKSNKE · 02-06-2006, 07:00 PM

just select the tab at the top of the EEC Analyzer screen with the mouse

Italian LX · 02-06-2006, 07:00 PM

Click on the MAF tab and use the 'IMPORT' button to pull in the MAF curve that you used in that datalog.

Keep in mind that if you don't already have the MAF curve in the .maf format, you won't be able to get it out of CalEdit using the EXPORT feature -- you'll end up with some funky reading.

The way I do it is to enter in the MAF curve into EA manually. You can then use EA's export feature and it will put it in a .maf format that you can use in CalEdit if need be.

04 Mach1 · 02-06-2006, 08:27 PM

Since I don't have the flow sheet from Pro-M what should I use for the MAF settings? What does the calculate button do and what should the maf curve 1and maf curve 2 be set at?

Italian LX · 02-06-2006, 08:31 PM

Quote:

Originally Posted by 04 Mach1

Since I don't have the flow sheet from Pro-M what should I use for the MAF settings? What does the calculate button do and what should the maf curve 1and maf curve 2 be set at?

Set curve 1 to what was used in the car during the datalog. Leave curve 2 blank. When you hit 'calculate', curve 3 will be you new MAF transfer based off of you KAMRFs in your datalog. Use the 'export' button to save any of the curves (it will prompt you and ask which curve you want to save).

04 Mach1 · 02-06-2006, 08:47 PM

When I hit calculate it says you need to select a file you want to play first.

86GT · 02-06-2006, 09:53 PM

Quote:

Originally Posted by 04 Mach1

When I hit calculate it says you need to select a file you want to play first.

That message indicates that you need to select a sound file that you want played at the end of a calculation. If you do not want a sound file played then goto the settings tab and take the check box off of the sound option, otherwise hit the browse button and select a sound file.

I responded to your MAF question on the Tweecer board.

02-06-2006, 06:45 PM	#1
04 Mach1 Bet I red light B4U Join Date: Aug 2005 Location: ANNISTON, AL Posts: 975	EEC Analyzer Help Needed Did the data log from the tweecer, pulled it into the datalog page in the analyzer. What is the next step? How do I get the MAF tab to pull up the file so I can see the MAF curve?

02-06-2006, 07:00 PM	#2
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: EEC Analyzer Help Needed just select the tab at the top of the EEC Analyzer screen with the mouse __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-06-2006, 07:00 PM	#3
Italian LX Daddy x4 ...we're done Join Date: Dec 2004 Location: Oxford, AL Posts: 11,551	Re: EEC Analyzer Help Needed Click on the MAF tab and use the 'IMPORT' button to pull in the MAF curve that you used in that datalog. Keep in mind that if you don't already have the MAF curve in the .maf format, you won't be able to get it out of CalEdit using the EXPORT feature -- you'll end up with some funky reading. The way I do it is to enter in the MAF curve into EA manually. You can then use EA's export feature and it will put it in a .maf format that you can use in CalEdit if need be. __________________ -Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring

02-06-2006, 08:27 PM	#4
04 Mach1 Bet I red light B4U Join Date: Aug 2005 Location: ANNISTON, AL Posts: 975	Re: EEC Analyzer Help Needed Since I don't have the flow sheet from Pro-M what should I use for the MAF settings? What does the calculate button do and what should the maf curve 1and maf curve 2 be set at?

02-06-2006, 08:47 PM	#6
04 Mach1 Bet I red light B4U Join Date: Aug 2005 Location: ANNISTON, AL Posts: 975	Re: EEC Analyzer Help Needed When I hit calculate it says you need to select a file you want to play first.