anyone use these header gaskets?

lukem80 · 02-09-2007, 08:25 AM

http://www.percyshp.com/index.php?op...id=5&Itemid=34

people say that they are badass?

Blown 5.0 · 02-09-2007, 03:19 PM

I use the collector gaskets, have had no problems.

89five0Gt · 02-10-2007, 07:17 AM

Quote:

Originally Posted by lukem80

http://www.percyshp.com/index.php?op...id=5&Itemid=34

people say that they are badass?

i got percy gaskets on my car. i ain't had no problem with them

Italian LX · 02-10-2007, 08:11 AM

Those look like what Rob has on his stroker motor. I may try some of thos in the future.

I've been using copper gaskets and have minimal issues. They do excellent on the first couple of uses, but they start leaking a little after additional installs.

I haven't heard the leaks, but when I remove them, you can see some of the black where the exhaust was seeping out.

I wonder how good the Percy gaskets are at being reused.

lukem80 · 02-10-2007, 12:20 PM

Quote:

Originally Posted by Italian LX

Those look like what Rob has on his stroker motor. I may try some of thos in the future.

I've been using copper gaskets and have minimal issues. They do excellent on the first couple of uses, but they start leaking a little after additional installs.

I haven't heard the leaks, but when I remove them, you can see some of the black where the exhaust was seeping out.

I wonder how good the Percy gaskets are at being reused.

yes my stock gasket is blown out on the driver's side... black stuff flowing out of it...

its such a PITA to take headers off a mod motor dude... once I get these guys on there I'm not going to be reusing them I HOPE!!!

QWKSNKE · 02-10-2007, 02:43 PM

Quote:

Originally Posted by lukem80

yes my stock gasket is blown out on the driver's side... black stuff flowing out of it...

its such a PITA to take headers off a mod motor dude... once I get these guys on there I'm not going to be reusing them I HOPE!!!

trust us.. we KNOW

02-09-2007, 08:25 AM	#1
lukem80 日本語 Join Date: Jul 2005 Location: Montgomery Posts: 1,661	anyone use these header gaskets? http://www.percyshp.com/index.php?op...id=5&Itemid=34 people say that they are badass?

02-09-2007, 03:19 PM	#2
Blown 5.0 Senior Member Join Date: Jan 2006 Location: Looking for more ways to add BOOST Posts: 167	I use the collector gaskets, have had no problems. __________________ Hauling A** on Pump Gas !!!!!

02-10-2007, 08:11 AM	#4
Italian LX Daddy x4 ...we're done Join Date: Dec 2004 Location: Oxford, AL Posts: 11,551	Those look like what Rob has on his stroker motor. I may try some of thos in the future. I've been using copper gaskets and have minimal issues. They do excellent on the first couple of uses, but they start leaking a little after additional installs. I haven't heard the leaks, but when I remove them, you can see some of the black where the exhaust was seeping out. I wonder how good the Percy gaskets are at being reused. __________________ -Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring