StreetStangs.net  

Go Back   StreetStangs.net > Technical > Ford Pushrod Tech (5.0 & 5.8)

Reply
 
Thread Tools Display Modes
Old 07-10-2007, 08:30 AM   #1
88 Sleeper Coupe
Member
 
Join Date: Apr 2007
Posts: 52
Flat Tappet to Roller Conversion Easy??

Guys I need some help. My Gt 350 car/project came with an extgra full roller block assembly. Well...good..because dude lied about the motor and its grenaded. So my question is.. I was told by a guy locally all my upper end flat-tappet motor (the heads, intake, carb, etc...) will bolt on to my complete roller block assembly and that the only difference was like the damn $30 push rods or something.

Can someone please chime in on how I can take all my crap off the flat-tappet motor and put it on my roller block?

thanks guys.
88 Sleeper Coupe is offline   Reply With Quote
Old 07-10-2007, 12:29 PM   #2
QWKSNKE
3v's are slow
 
QWKSNKE's Avatar
 
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
the difference between roller and non roller is the lifter valley and cam. As far as heads, intake, etc it is the same. If you don't have the stock stuff for the roller block you will need a roller cam and roller lifters. Everything else off the 84 model will bolt up
__________________
2009 Porsche Carrera S
2008 ///AMG C63.. Eurocharge Tune. RIP
2019 AMG GLC43..wife's
03 F250 SD.. Edge Evo, AFE Stage 1 CAI
08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's
01 Cobra vert... wife's

I need a new toy
QWKSNKE is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:40 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.