08-07-2005, 01:44 PM | #1 |
Member
Join Date: Jul 2005
Location: Elliot Lake,Ontario,Canada
Posts: 86
|
can anybody tell me what block i have
here goes,I bought a short block from engine builder that was taken on trade for new motor it`s a347 stroker 4 bolt block,heres my question casting #D1ZE t-stat is in the intake & it has thread in frost plugs thanx in advance any help would be greatly appreciated
|
08-07-2005, 01:52 PM | #2 |
Friends
Join Date: Dec 2004
Posts: 1,645
|
Re: can anybody tell me what block i have
This blcok that you have does it have 4 bolts in mains 2.3, and 4, and the 1# and # 5 have 2 bolts, if it does it is an R302 block, another way to see if you vae an R block is, to look at the block facing you, at the front it should have freezes plugs at the front of the block and in one side it will say SVO stamped on it. What did you pay for the block? Another way to see what block you have, look were the starter goes up there it will have stamped some numbers an a R at the begining of the next letter. Example D1---R302 Take a picture of it and posted with mains showing, hopefully this helps:
Edgar |
08-07-2005, 02:11 PM | #3 | |
Member
Join Date: Jul 2005
Location: Elliot Lake,Ontario,Canada
Posts: 86
|
Re: can anybody tell me what block i have
Quote:
|
|
08-07-2005, 05:33 PM | #4 |
Guest
Posts: n/a
|
Re: can anybody tell me what block i have
1971 302 block!!!!!
|
08-07-2005, 05:34 PM | #5 |
Guest
Posts: n/a
|
Re: can anybody tell me what block i have
and the 68-74 302 blocks were the strongest stock 302 blocks ever made...similar to the build of a mexican block
|
08-07-2005, 05:37 PM | #6 |
Member
Join Date: Jul 2005
Location: Elliot Lake,Ontario,Canada
Posts: 86
|
Re: can anybody tell me what block i have
not trying to be rude but this is a 4 bolt main block and I am not aware of too many factory 4 bolt blocks that is why I am trying to figure out if it`s a"BOSS" block an "A4" or a"R302" thanx
|
08-07-2005, 05:45 PM | #7 |
ooooo cake!!!
Join Date: Dec 2004
Location: Saks, AL
Posts: 1,630
|
Re: can anybody tell me what block i have
From what I find it is a 70 boss 302 "service block" although I'm not sure exactly what "service block" refers to. Hope that helps though.
|
08-07-2005, 05:51 PM | #8 |
Member
Join Date: Jul 2005
Location: Elliot Lake,Ontario,Canada
Posts: 86
|
Re: can anybody tell me what block i have
thanx wall96cobra I believe "service" block refers to a factory replacement ie: over the counter parts oem
|
08-07-2005, 05:57 PM | #9 | |
ooooo cake!!!
Join Date: Dec 2004
Location: Saks, AL
Posts: 1,630
|
Re: can anybody tell me what block i have
Quote:
Cool, I was kinda thinking that's what they were talking about but wasn't too sure. |
|
08-07-2005, 06:05 PM | #10 |
Member
Join Date: Jul 2005
Location: Elliot Lake,Ontario,Canada
Posts: 86
|
Re: can anybody tell me what block i have
I just made a judgement call gonna keep na with my TFS"R" heads should run over 450HP and I`ll build another motor to be blown
|
|
|