04-11-2008, 05:12 PM | #1 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
Question about my block?
The thing is I got my Engine out and broke down but i dont see anything wrong. The mains look ok, the skirts good, rods look good, nothing was loose so I dont know whats up. any suggestions?? Thanks Steven
__________________
Bottled 89 Coupe |
04-11-2008, 05:21 PM | #2 |
Mine's bigger...
|
You sprayed so much that it shot the other 3 cams outta the motor. Thats your problem
__________________
323rwhp | 320rwtq - 4VNA 12.13 @ 113.36 | 1.63 60' |
04-11-2008, 05:44 PM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
What problem were you having that led you to remove the motor
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
04-11-2008, 06:39 PM | #4 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
I don't think I ever heard you say what was wrong with the motor.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
04-11-2008, 06:47 PM | #5 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
What about the pistons and pins????
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
04-11-2008, 08:18 PM | #6 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Low oil pressure?,knocking?,WTF?
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS Last edited by EHardy1971; 04-11-2008 at 08:28 PM. |
04-11-2008, 10:13 PM | #7 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
I thought I said something about it in another thread. I was testing out my suspension at holiday beach the other day and after a pass it started knocking and it went down to 10 pounds of oil presssure. Hopefully I will figure it out tomorrow. I plan on inspecting it alittle bit more and maybe care it to a guy I know who builds motors for Bennett racing. I would rather figure it out my self if possible. Thanks Steven
__________________
Bottled 89 Coupe |
04-11-2008, 10:33 PM | #8 |
Senior Member
Join Date: Jun 2007
Location: bham and auburn
Posts: 337
|
was your windage tray in the oil pan messed up. because if that was loose it could have sucked up to the oil pickup or if you oil pump was loose or if the pump driveshaft was stripped it could all do that too. like twisiting than popping when it slips.
__________________
finally got my avatar. it is the white one. |
04-11-2008, 11:21 PM | #9 | |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
Quote:
I dont have a Windage tray but I have a main cap girdle and it looked good plus it was tight. The oil shaft was ok also.
__________________
Bottled 89 Coupe Last edited by 97cobrasvt; 04-11-2008 at 11:26 PM. |
|
04-12-2008, 02:10 PM | #10 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
maybe the oil pump went bad
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|