rear seat delet kits..

QWKSNKE · 10-08-2006, 08:39 AM

This site has been around for awhile but I had forgotten about it.

This is a nice and clean rear seat delete kit.

http://www.mustangrearseatdelete.com/

mustangmuscle · 10-08-2006, 04:45 PM

Been looking for a nice kit, that wont break the bank. Been hearing alot about kits that dont fit right, ie, gaps and overhang that shouldnt be there. Seems most use 1/4"-3/4" MDF. Isnt that stuff kinda heavy, which would defeat the weight savings of a RSD?

Also, theres a billet aluminum one. Very pricey, though....
http://www.swautosport.com/catalog/p...products_id=37

kdezines · 10-08-2006, 05:37 PM

Hey guys, I saw the post about the kits that I make. The kits are offered in 2 differnet thicknesses. There is the 1/2inch kit which weighs about as the rear seat and hardware (50lbs). If weight is a concern, the kit is offered in 1/4inch and weighs about 30lbs. If that is still too heavy then I offer the front half only in both thicknesses and the 1/4inch weighs about 20lbs. With the front half only kit, you still need to use your existing hatch carpet. Let me know if you have any questions. Thanks Keith

Shorty · 10-09-2006, 08:40 PM

i will be ordering a two sub kit just as soon as i get a few things behind and actually get time to install anything. those look very nice. i have been wanting to do that but didnt really have enough faith in my craftmanship.

rtusnake · 10-09-2006, 09:57 PM

Quote:

Originally Posted by mustangmuscle

Been looking for a nice kit, that wont break the bank. Been hearing alot about kits that dont fit right, ie, gaps and overhang that shouldnt be there. Seems most use 1/4"-3/4" MDF. Isnt that stuff kinda heavy, which would defeat the weight savings of a RSD?

Also, theres a billet aluminum one. Very pricey, though....
http://www.swautosport.com/catalog/p...products_id=37

You going to sell your rear seats when you do it?

TheJeanyus · 10-09-2006, 09:59 PM

What's the point of a RSD that weighs just as much as the rear seat and hardware?

mustangmuscle · 10-10-2006, 06:35 AM

Quote:

Originally Posted by rtusnake

You going to sell your rear seats when you do it?

I havent even thought that far ahead.....??

mustangmuscle · 10-10-2006, 06:39 AM

Quote:

Originally Posted by TheJeanyus

What's the point of a RSD that weighs just as much as the rear seat and hardware?

Brilliant minds think alike!!!

WERD!

My reason for doing this mod is to shed some poundage off this heavy pig! (the car, not me..I aint goin on a diet...LOL)

Not mounting any subs, amps, NO2 bottles,etc.
Just want a nice, clean kit to get the seat outta there to save some weight.

CrimsonRacing · 10-10-2006, 06:41 AM

Hmmmmmmmmm..............1/4 inch kit.......

Wonders if it will support 2 DR's and a jack whilst traveling.........

uvbnhad · 10-10-2006, 07:34 AM

Quote:

Originally Posted by TheJeanyus

What's the point of a RSD that weighs just as much as the rear seat and hardware?

I thought about doing it just so that I can get my trunk space back. Right now I have an amp and a 12" sub w/ box in the rear and as you can imagine no space left at all. I was planning on moving the amp and sub to where there rear seat is now and then doing a battery relocation to the trunk. Not to mention it will open the space back up for another bottle.

10-08-2006, 08:39 AM	#1
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	rear seat delet kits.. This site has been around for awhile but I had forgotten about it. This is a nice and clean rear seat delete kit. http://www.mustangrearseatdelete.com/

10-08-2006, 04:45 PM	#2
mustangmuscle Senior Member Join Date: Mar 2005 Location: Auburn Posts: 792	Been looking for a nice kit, that wont break the bank. Been hearing alot about kits that dont fit right, ie, gaps and overhang that shouldnt be there. Seems most use 1/4"-3/4" MDF. Isnt that stuff kinda heavy, which would defeat the weight savings of a RSD? Also, theres a billet aluminum one. Very pricey, though.... http://www.swautosport.com/catalog/p...products_id=37 __________________ 04 Red Fire Cobra JLT RAI MGW Shifter Bassani cat-back Bassani catted-X MM FLSFC's BF IRS Brace Lukem80 Special Edition Hi-perf springs BF 2.76 S/C pulley SCT XCAL2 DiabloSport MAFia NGK TR6 Plugs Steg Stage 4 Eaton Afco D/P H/E Metco 2# Lower KB BAP SPEC 3+ clutch w/SPEC steel fw 60# inj's 491rwhp/504rwtq

10-09-2006, 08:40 PM	#4
Shorty Pr0j3ct P1mp T1t3, y0! Join Date: Dec 2004 Location: Somewhere wondering why Crimson stole my avatar Posts: 2,022	i will be ordering a two sub kit just as soon as i get a few things behind and actually get time to install anything. those look very nice. i have been wanting to do that but didnt really have enough faith in my craftmanship. __________________ 93 GT----225rwhp/287rwtq--------1/4 mile= (but getting better)

10-09-2006, 09:59 PM	#6
TheJeanyus Administrator Join Date: Dec 2004 Location: Huntsville, AL Posts: 14,774	What's the point of a RSD that weighs just as much as the rear seat and hardware? __________________ 1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI

10-10-2006, 06:41 AM	#9
CrimsonRacing Comfortably NUMB Join Date: Dec 2004 Location: ALIVE AGAIN Posts: 1,704	Hmmmmmmmmm..............1/4 inch kit....... Wonders if it will support 2 DR's and a jack whilst traveling......... __________________ '02 GT....just another money pit.

10-08-2006, 05:37 PM	#3
kdezines Junior Member Join Date: Oct 2006 Posts: 7	Hey guys, I saw the post about the kits that I make. The kits are offered in 2 differnet thicknesses. There is the 1/2inch kit which weighs about as the rear seat and hardware (50lbs). If weight is a concern, the kit is offered in 1/4inch and weighs about 30lbs. If that is still too heavy then I offer the front half only in both thicknesses and the 1/4inch weighs about 20lbs. With the front half only kit, you still need to use your existing hatch carpet. Let me know if you have any questions. Thanks Keith