01-27-2007, 06:02 AM | #1 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
fuel injectors
fuel injectors for an SVO or turbo coupe
are they high impedence or low impedence and what other vehicals share injectors that are compatiable with and the svo or turbo coupe thanks joe
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
01-27-2007, 06:44 AM | #2 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Browntop are 35# injectors same as svo and 87,88 turbocoupe. I have seen many of these injectors cleaned and flow tested, then leak when installed. Keep in mind how old they are.
New injectors run about $50 to $75 each. low impedence.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne Last edited by SvoBrown; 01-28-2007 at 04:02 PM. |
01-27-2007, 09:07 AM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
SVO's and turbo coupes are low impedence injectors. Everything else ford has are high impedence
|
01-27-2007, 11:34 AM | #4 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Are the lighting injectors high impedence also?
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
01-27-2007, 01:51 PM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
yes
|
01-27-2007, 08:47 PM | #6 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
I've wanted to try installing some low-impedence 72's in an SVO and re-configure the VAM meter somehow...maybe with a TwEECer or something like that.
84-85 SVO has a 30# I think. The 35# are 85.5 and up, along with the 87-88 TC.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
01-28-2007, 11:00 PM | #7 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
thanks that is what i thought
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
|
|