still needing tranny

tayzoid1 · 04-06-2008, 10:17 PM

i am still in need of a transmission i got one put it in and bam just my luck its needing a rebuild also so if anybody has any good smooth shifting t-5s for sale give me a pm no factory pull offs w/ 100k of "easy shifting" looking for a very recent rebuilt t-5 thanks

taylor

qkjuicedpony · 04-07-2008, 06:49 AM

astro perfomance has new t-5's for 695 exchanged

coupe · 04-07-2008, 07:27 AM

Not sure what the nature of your transmission issues are, but just make sure that you're not mixing & matching a foxbody trans with an SN95 bellhousing. The input shaft length is wrong and the trans breaks after a short time.

Italian LX · 04-07-2008, 07:29 AM

Quote:

Originally Posted by tayzoid1

i am still in need of a transmission i got one put it in and bam just my luck its needing a rebuild also...

Is it making noise or just won't shift?

tayzoid1 · 04-07-2008, 10:37 PM

supposedly came out of a v-8 car but the tail shaft as abit diffrent than my factory and it leaks abit when the driveshaft is spinning when you sitting at a redlight and you push ing the clutch it will grind until it finnally catches 1st then bump, not grind just bump/cruch into gears we put it in a buddys fairlane and itwas supposedly rebuilt when he got it i think it came out of a 6cyl car and i think enphisize think the gearing in the tranny are diffrent. ive tried adjusting the clutch, i figgured it just wasnt pulling all they way off the plate so it was still spinning or something but all the adjustments in the world(that i have done) hasent seemed to fix this problem so back out the tranny comes(on the floor w/ hand tools of course)and i am getting my money bacjk but i am thinking about going qkjuicedpony's route and go throught the company he named (which i would like to have more info or a phone #if anybody knows where i can find one)to get the tranny that way i know what ill be getting and hopefully not have to pull this thoing out till i break it becouse of power (or he next 170k of slap stickin

) thanks all

taylor

banditmwp · 04-08-2008, 07:09 PM

Quote:

Originally Posted by tayzoid1

supposedly came out of a v-8 car but the tail shaft as abit diffrent than my factory and it leaks abit when the driveshaft is spinning when you sitting at a redlight and you push ing the clutch it will grind until it finnally catches 1st then bump, not grind just bump/cruch into gears we put it in a buddys fairlane and itwas supposedly rebuilt when he got it i think it came out of a 6cyl car and i think enphisize think the gearing in the tranny are diffrent. ive tried adjusting the clutch, i figgured it just wasnt pulling all they way off the plate so it was still spinning or something but all the adjustments in the world(that i have done) hasent seemed to fix this problem so back out the tranny comes(on the floor w/ hand tools of course)and i am getting my money bacjk but i am thinking about going qkjuicedpony's route and go throught the company he named (which i would like to have more info or a phone #if anybody knows where i can find one)to get the tranny that way i know what ill be getting and hopefully not have to pull this thoing out till i break it becouse of power (or he next 170k of slap stickin

) thanks all

taylor

http://www.astroperformance.com

tayzoid1 · 04-08-2008, 08:47 PM

thanks

tayzoid1 · 04-08-2008, 08:49 PM

okay so i looked on the site and it said they were 1,395 bucks thats a little more than 695 anybody know where i can get that price?

tayzoid1 · 04-08-2008, 08:51 PM

sorry im a dumbass i found what i was lookin for

thanks all

taylor

EHardy1971 · 04-10-2008, 06:19 PM

Look in todays buy sell bulletin in the parts section,somebody has 2 for $300,"One in running condition,the other questionable".

04-06-2008, 10:17 PM	#1
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	still needing tranny i am still in need of a transmission i got one put it in and bam just my luck its needing a rebuild also so if anybody has any good smooth shifting t-5s for sale give me a pm no factory pull offs w/ 100k of "easy shifting" looking for a very recent rebuilt t-5 thanks taylor __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

04-07-2008, 06:49 AM	#2
qkjuicedpony Dayuuuuuuum!!!!! Join Date: Dec 2004 Location: Dallas GA Posts: 2,933	astro perfomance has new t-5's for 695 exchanged __________________ 86 Mustang Gt......Mods piling up in my garage. 07 F350 dooly.....Tows my fifth wheel

04-07-2008, 07:27 AM	#3
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Not sure what the nature of your transmission issues are, but just make sure that you're not mixing & matching a foxbody trans with an SN95 bellhousing. The input shaft length is wrong and the trans breaks after a short time. __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

04-07-2008, 10:37 PM	#5
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	supposedly came out of a v-8 car but the tail shaft as abit diffrent than my factory and it leaks abit when the driveshaft is spinning when you sitting at a redlight and you push ing the clutch it will grind until it finnally catches 1st then bump, not grind just bump/cruch into gears we put it in a buddys fairlane and itwas supposedly rebuilt when he got it i think it came out of a 6cyl car and i think enphisize think the gearing in the tranny are diffrent. ive tried adjusting the clutch, i figgured it just wasnt pulling all they way off the plate so it was still spinning or something but all the adjustments in the world(that i have done) hasent seemed to fix this problem so back out the tranny comes(on the floor w/ hand tools of course)and i am getting my money bacjk but i am thinking about going qkjuicedpony's route and go throught the company he named (which i would like to have more info or a phone #if anybody knows where i can find one)to get the tranny that way i know what ill be getting and hopefully not have to pull this thoing out till i break it becouse of power (or he next 170k of slap stickin) thanks all taylor __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

04-08-2008, 08:47 PM	#7
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	thanks __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

04-08-2008, 08:49 PM	#8
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	okay so i looked on the site and it said they were 1,395 bucks thats a little more than 695 anybody know where i can get that price? __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

04-08-2008, 08:51 PM	#9
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	sorry im a dumbass i found what i was lookin for thanks all taylor __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

04-10-2008, 06:19 PM	#10
EHardy1971 Trunk Monkey Join Date: Jun 2007 Location: Home Posts: 5,708	Look in todays buy sell bulletin in the parts section,somebody has 2 for $300,"One in running condition,the other questionable". __________________ Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS