'02-04 GT axles...

coupe · 08-11-2006, 10:32 AM

Anyone know how to get an ABS ring/trigger as a separate part to install on an aftermarket axle like Moser?

Moser said they came with it on, but guess what...

Buying the whole Ford axle is high-dollar and a set of aftermarkets is a great option./ Anyone been down this route before???

--Matt.

RTGreen · 08-11-2006, 12:45 PM

You should be able to press the old ABS rings of the old axles...right?

coupe · 08-11-2006, 01:27 PM

Found it and a part number.
Thanks Scott @ Ernest McCarty Ford.
Thanks also to DTS - DriveTrainSpecialists. http://www.drivetrainspecialists.com/

Italian LX · 08-13-2006, 09:05 PM

Quote:

Originally Posted by RTGreen

You should be able to press the old ABS rings of the old axles...right?

Yeah, but apparently the old ones are non-existant for this car now.

Italian LX · 08-13-2006, 09:06 PM

Quote:

Originally Posted by coupe

Found it and a part number.

How about posting it here for future reference for others.

coupe · 08-14-2006, 07:55 AM

Here's the note from DTS Regarding the axles:

IF THEY ARE C-CLIP AXLES, THEN THE FACTORY TONE-WHEEL SHOULD BE ABLE TO BE PRESSED ONTO THEM.

YOU CAN GET NEW ONES FROM FORD DEALERSHIP.

FORD PART # F4ZZ-2C189A

DTS CUSTOM SERVICES

1-877-874-7327 TOLL FREE

asilver2001gt · 08-17-2006, 09:50 PM

Lesson learned...do not reuse the abs rings. we did this when i swapped to a 31 spline setup and it didn't work well...i believe they are in the $18 range if you know someone at ford highly worth it in my opinion

08-11-2006, 10:32 AM	#1
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	'02-04 GT axles... Anyone know how to get an ABS ring/trigger as a separate part to install on an aftermarket axle like Moser? Moser said they came with it on, but guess what... Buying the whole Ford axle is high-dollar and a set of aftermarkets is a great option./ Anyone been down this route before??? --Matt.

08-11-2006, 12:45 PM	#2
RTGreen Senior Member Join Date: Dec 2004 Posts: 204	Re: '02-04 GT axles... You should be able to press the old ABS rings of the old axles...right?

08-11-2006, 01:27 PM	#3
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Re: '02-04 GT axles... Found it and a part number. Thanks Scott @ Ernest McCarty Ford. Thanks also to DTS - DriveTrainSpecialists. http://www.drivetrainspecialists.com/ __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

08-14-2006, 07:55 AM	#6
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Here's the note from DTS Regarding the axles: IF THEY ARE C-CLIP AXLES, THEN THE FACTORY TONE-WHEEL SHOULD BE ABLE TO BE PRESSED ONTO THEM. YOU CAN GET NEW ONES FROM FORD DEALERSHIP. FORD PART # F4ZZ-2C189A DTS CUSTOM SERVICES 1-877-874-7327 TOLL FREE __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

08-17-2006, 09:50 PM	#7
asilver2001gt Dr Rob Join Date: Dec 2004 Location: my car is flat out retarded and lee likes it! Posts: 1,193	Lesson learned...do not reuse the abs rings. we did this when i swapped to a 31 spline setup and it didn't work well...i believe they are in the $18 range if you know someone at ford highly worth it in my opinion __________________ 2007 Z06--Bone Stock LS7 overpriced piece of plastic with a big ass motor 2006 Trailblazer SS: TrickFlow 215's Comp Cam 591/598 Fast 102 FLT Level VI The DD