1994 Mustang GT - Page 3

RedSuperRanger23 · 02-19-2011, 05:50 PM

Well, I stopped by Henson Performace today before work to talk to James and see if I could get John's dyno sheets... I have to say that I'm a little dissapointed, but at least I have some base numbers to work with now.

260.9hp/307.5ft-lbs

QWKSNKE · 02-19-2011, 07:30 PM

it is because of the auto, if the car was a 5 speed it would easily hit 300

qkjuicedpony · 02-19-2011, 08:40 PM

Quote:

Originally Posted by QWKSNKE

it is because of the auto, if the car was a 5 speed it would easily hit 300

This. Probably make just over 300whp with a 5 speed.

coupe · 02-21-2011, 08:36 AM

...but probably faster with the auto.

RedSuperRanger23 · 04-05-2011, 10:45 PM

just a little update, I fixed the non-functioning odometer and replaced the gauge lights with LED's as well as the lights in the HVAC panel. I also fixed the weatherstripping around the driver side window on the body. Next up is going to be either the passenger side power lock switch or a hammer shifter.

BLOWN95GT · 04-06-2011, 05:40 AM

Sweet looking ride! You planning on going to the big mustang show at the Town and Country Ford dealership in Bessemer on April 16 ?

RedSuperRanger23 · 04-06-2011, 10:19 AM

I'm gonna have to check the schedule at work and see if I can take off... otherwise I'll be there but I won't get to stay long... and I wont be in a Mustang. I was at the cruise-in at Alabaster last Saturday though... I was "sick" lol.

BLOWN95GT · 04-06-2011, 01:28 PM

Yea I didn't make it to Alabaster or Gadsden I had a fuel pressur regulator issue, if you can't make it to the show at town and country there should be one sometime this month in fultondale I think

RedSuperRanger23 · 04-06-2011, 08:36 PM

yeah, all these shows and cruise-ins happening this month are killing me since I don't have weekends off.

02-19-2011, 05:50 PM	#21
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	Well, I stopped by Henson Performace today before work to talk to James and see if I could get John's dyno sheets... I have to say that I'm a little dissapointed, but at least I have some base numbers to work with now. 260.9hp/307.5ft-lbs __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

02-19-2011, 07:30 PM	#22
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	it is because of the auto, if the car was a 5 speed it would easily hit 300 __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

04-05-2011, 10:45 PM	#25
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	just a little update, I fixed the non-functioning odometer and replaced the gauge lights with LED's as well as the lights in the HVAC panel. I also fixed the weatherstripping around the driver side window on the body. Next up is going to be either the passenger side power lock switch or a hammer shifter. __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

04-06-2011, 10:19 AM	#27
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	I'm gonna have to check the schedule at work and see if I can take off... otherwise I'll be there but I won't get to stay long... and I wont be in a Mustang. I was at the cruise-in at Alabaster last Saturday though... I was "sick" lol. __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

04-06-2011, 08:36 PM	#29
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	yeah, all these shows and cruise-ins happening this month are killing me since I don't have weekends off. __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

02-21-2011, 08:36 AM	#24
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	...but probably faster with the auto.

04-06-2011, 05:40 AM	#26
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	Sweet looking ride! You planning on going to the big mustang show at the Town and Country Ford dealership in Bessemer on April 16 ?

04-06-2011, 01:28 PM	#28
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	Yea I didn't make it to Alabaster or Gadsden I had a fuel pressur regulator issue, if you can't make it to the show at town and country there should be one sometime this month in fultondale I think