03-08-2008, 12:09 AM | #1 |
Senior Member
Join Date: Mar 2005
Posts: 593
|
Aeromotive A1000 pump install
anyone have any experience with installing one of these pumps? i got one and wondered if i can splice into the stock harness where the factory pump was wired or do i need to wire it all up new?
__________________
5.4 project in the works..... link: http://www.illwillinc.com/97mustang.htm PowderCoating and Anodizing: http://www.illwillinc.com/ |
03-08-2008, 12:41 AM | #2 |
ooooo cake!!!
Join Date: Dec 2004
Location: Saks, AL
Posts: 1,630
|
It would be best to connect the factory fuel pump wire to a relay as a trigger and run a separate fused power wire (12-14ga) from the battery to the relay as main power. That's how I did it in the cobra when I had 2 external pumps.
|
03-08-2008, 06:28 AM | #3 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
Factory wiring isn't adequate as a power supply to a pump like that.as wall said use the power side as a trigger and get a 30 amp relay at the least to use
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
|
|