02-21-2006, 06:29 PM | #1 |
Member
|
672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
Decided to dyno the car today before I ripped the ole heaton off, and install the 2.4KB. I never knew what the car was dyno'n with the eaton/n20 and latest shot so I gave it a whirl. All pulls were done with empty tank with 5 gallons of 93 Octane and 32oz of Torco premixed in the tank. Pulled the plugs and they look pristine.
1st off thanks to XXX Motorsports in Pensacola, finally a dyno close to me. 1st pull was 618/732 tq SAE on the .048 jet which I usually run at the track a/f was rich on the big end, didnt have a way to tune it out so I decided to up the n20 jet to a 100 shot or there about .053 jet, and did the car respond like a madman. 2nd pull I threw the .053 jet in and sprayed it a lil later at 3700, didnt want to lug it down at all, and the car responded violently to 672whp 763tq SAE STD #'s were 690whp 784tq. I think 700whp is very possible with some simple work in the tune and a slightly bigger n20 jet with the ported eaton. Well see what happens now, KB goes on this week, plan on a small shot of sauce, alot of octane and hope she stays in one piece by the time the track rental rolls around. Had a blast last time VIDEO ADDED http://media.putfile.com/n20-cobra
__________________
03 Cobra -- Sonic Blue 2.4 KB @ 23psi, IRS, Bolt On's 10.45@134 |
02-21-2006, 06:34 PM | #2 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
Damn gotta love the torque. Who did the porting on your eaton and how well was you pleased with it?
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
02-21-2006, 06:35 PM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
Good Gawwd!!!!
That's awesome
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
02-21-2006, 06:53 PM | #4 |
Administrator
Join Date: Dec 2004
Location: Huntsville, AL
Posts: 14,774
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
I want a Steggy Stg IV so bad.
__________________
1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI |
02-21-2006, 08:19 PM | #5 |
Member
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
Stegiemiere Engine Airflow out of St Louis, best in the business been porting blowers the longest and have the strongest #'s.
vid added http://media.putfile.com/n20-cobra
__________________
03 Cobra -- Sonic Blue 2.4 KB @ 23psi, IRS, Bolt On's 10.45@134 |
02-21-2006, 08:53 PM | #6 |
Welcome to America!
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
__________________
91 GT Convertible 2006 Nissan Titan LE Crew Cab 2014 Peterbilt 337/Marion 22' box |
02-22-2006, 09:01 AM | #7 |
You can call me mister.
Join Date: Jan 2005
Location: Plenty recovered.
Posts: 3,518
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
Dang it. That's just crazy.
|
02-22-2006, 12:33 PM | #8 | |
Senior Member
Join Date: Mar 2005
Location: Auburn
Posts: 792
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
Quote:
__________________
04 Red Fire Cobra JLT RAI MGW Shifter Bassani cat-back Bassani catted-X MM FLSFC's BF IRS Brace Lukem80 Special Edition Hi-perf springs BF 2.76 S/C pulley SCT XCAL2 DiabloSport MAFia NGK TR6 Plugs Steg Stage 4 Eaton Afco D/P H/E Metco 2# Lower KB BAP SPEC 3+ clutch w/SPEC steel fw 60# inj's 491rwhp/504rwtq |
|
02-22-2006, 12:35 PM | #9 |
Senior Member
Join Date: Mar 2005
Location: Auburn
Posts: 792
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
broke....
U gonna show me how to launch at Track Day??? I watched you hookin' at the last one........AWESOME!!!
__________________
04 Red Fire Cobra JLT RAI MGW Shifter Bassani cat-back Bassani catted-X MM FLSFC's BF IRS Brace Lukem80 Special Edition Hi-perf springs BF 2.76 S/C pulley SCT XCAL2 DiabloSport MAFia NGK TR6 Plugs Steg Stage 4 Eaton Afco D/P H/E Metco 2# Lower KB BAP SPEC 3+ clutch w/SPEC steel fw 60# inj's 491rwhp/504rwtq |
02-22-2006, 12:56 PM | #10 |
日本語
|
Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
guess me and pulley breaker need a freaking 100 dry shot and a port..
SHIT |
|
|