Engine Block Numbers

89StangRompt · 02-13-2010, 03:31 PM

heres the numbers on my block does anyone know what model my motor is
year/make/model thanks this will solve my problem cuz i know it isnt a mustang motor now, cause i have the absolute wrong flywheel which is causeing me my problems

a second revision

QWKSNKE · 02-13-2010, 04:28 PM

Which flywheel do you currently have?

89StangRompt · 02-13-2010, 04:42 PM

Quote:

Originally Posted by QWKSNKE

Which flywheel do you currently have?

the flywheel i got now on there is 89 mustang gt

I think where i had SF29 i think it's 8F29

QWKSNKE · 02-13-2010, 06:32 PM

as long as the flywheel/ bellhousing/ starter match up in year model you should be good now.

89StangRompt · 02-13-2010, 07:06 PM

Quote:

Originally Posted by QWKSNKE

as long as the flywheel/ bellhousing/ starter match up in year model you should be good now.

yeah but obviously is doesnt line up thats why i gotta find out what year model this engine is so i can get the right flywheel

93cobra1928 · 02-13-2010, 07:50 PM

I can see an E in the pics which indicates the '80's so if the
stuff you have is late 80's 50oz balance then you have the
right stuff

QWKSNKE · 02-13-2010, 07:51 PM

what transmission/bellhousing do you have?

89StangRompt · 02-13-2010, 08:57 PM

Quote:

Originally Posted by QWKSNKE

what transmission/bellhousing do you have?

its a 5speed tremec t5

89StangRompt · 02-13-2010, 09:00 PM

Quote:

Originally Posted by 93cobra1928

I can see an E in the pics which indicates the '80's so if the
stuff you have is late 80's 50oz balance then you have the
right stuff

i got an 89 flywheel but i dunno bout the 50oz everything is brand new and everything is lined up and the starter still grinds

QWKSNKE · 02-13-2010, 09:02 PM

Have you turned the flywheel and looked for bad teeth on the ring gear? Does the bell housing appear to have any damage or cracks anywhere?

EDIT... When you installed the flywheel did you tighten the piss out of the bolts

02-13-2010, 03:31 PM	#1
89StangRompt Junior Member Join Date: Feb 2010 Location: Anniston,AL Posts: 28	Engine Block Numbers heres the numbers on my block does anyone know what model my motor is year/make/model thanks this will solve my problem cuz i know it isnt a mustang motor now, cause i have the absolute wrong flywheel which is causeing me my problems a second revision __________________ 89 Mustang GT 302 Cubic Inches Crane Cam Setup Holley 750 dbl Pump Whole Lota Gittyup Last edited by 89StangRompt; 02-13-2010 at 03:46 PM.

02-13-2010, 04:28 PM	#2
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Which flywheel do you currently have? __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-13-2010, 06:32 PM	#4
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	as long as the flywheel/ bellhousing/ starter match up in year model you should be good now. __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-13-2010, 07:50 PM	#6
93cobra1928 Dazed and Confused Join Date: Mar 2009 Location: Northport, Al Posts: 778	I can see an E in the pics which indicates the '80's so if the stuff you have is late 80's 50oz balance then you have the right stuff __________________ Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards

02-13-2010, 07:51 PM	#7
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	what transmission/bellhousing do you have? __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-13-2010, 09:02 PM	#10
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Have you turned the flywheel and looked for bad teeth on the ring gear? Does the bell housing appear to have any damage or cracks anywhere? EDIT... When you installed the flywheel did you tighten the piss out of the bolts __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy Last edited by QWKSNKE; 02-13-2010 at 09:04 PM.