name that tune

dylan020 · 06-05-2007, 06:58 PM

haha really not that funny but....what sound does a bad throw out bearing make??

that metal to metal chatter/tapping/clicking turned out to not be the exhaust

only confusing part is...goes into every gear just fine...only the noise is completely gone in 4th gear

ujslost · 06-05-2007, 07:05 PM

does it quit when you press the clutch pedal in?

dylan020 · 06-05-2007, 07:40 PM

im pretty sure it did, i havent had the car for a few days but im pretty sure it did stop when the clutch was in.....but on the other hand, it did it at idle when the car was started

QWKSNKE · 06-06-2007, 04:58 AM

I would have to hear it but most of the time a t/o bearings will squeal or whine until depressed

coupe · 06-06-2007, 07:29 AM

Quote:

only the noise is completely gone in 4th gear

transmission.

94five0 · 06-06-2007, 06:01 PM

Quote:

Originally Posted by QWKSNKE

I would have to hear it but most of the time a t/o bearings will squeal or whine until depressed

oo-gonzo · 06-08-2007, 05:14 PM

If it sounds like a bird on crack (chirping) it is the throw out bearing in the clutch. It goes away when the pedal is pushed and sometimes at higher speeds, 70mph or so. Welcome to the club! Mine has been doing it for about a month now. I am waiting to save the money for a whole new clutch. Labor cost the same to put a new one in as it does to replace a $20 T/B. We should cruise together some time, it might sound like a flock of birds. LOL

dylan020 · 06-08-2007, 05:50 PM

well not looking like the to bearing now...pulling the tranny monday to see if its the cluster or a broken tooth off the input shaft

06-05-2007, 06:58 PM	#1
dylan020 Senior Member Join Date: Apr 2005 Location: Movin to the Gump Posts: 629	name that tune haha really not that funny but....what sound does a bad throw out bearing make?? that metal to metal chatter/tapping/clicking turned out to not be the exhaust only confusing part is...goes into every gear just fine...only the noise is completely gone in 4th gear __________________ 95 GT: RIP 97 GT: Bone fricken' stock....and no idea what to do with a 4.6

06-05-2007, 07:40 PM	#3
dylan020 Senior Member Join Date: Apr 2005 Location: Movin to the Gump Posts: 629	im pretty sure it did, i havent had the car for a few days but im pretty sure it did stop when the clutch was in.....but on the other hand, it did it at idle when the car was started __________________ 95 GT: RIP 97 GT: Bone fricken' stock....and no idea what to do with a 4.6

06-06-2007, 04:58 AM	#4
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	I would have to hear it but most of the time a t/o bearings will squeal or whine until depressed __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

06-08-2007, 05:50 PM	#8
dylan020 Senior Member Join Date: Apr 2005 Location: Movin to the Gump Posts: 629	well not looking like the to bearing now...pulling the tranny monday to see if its the cluster or a broken tooth off the input shaft __________________ 95 GT: RIP 97 GT: Bone fricken' stock....and no idea what to do with a 4.6

06-05-2007, 07:05 PM	#2
ujslost Senior Member Join Date: May 2005 Location: ALBERTVILLE, AL Posts: 498	does it quit when you press the clutch pedal in?

06-08-2007, 05:14 PM	#7
oo-gonzo Senior Member Join Date: Aug 2006 Location: Gadsden, AL. Posts: 290	If it sounds like a bird on crack (chirping) it is the throw out bearing in the clutch. It goes away when the pedal is pushed and sometimes at higher speeds, 70mph or so. Welcome to the club! Mine has been doing it for about a month now. I am waiting to save the money for a whole new clutch. Labor cost the same to put a new one in as it does to replace a $20 T/B. We should cruise together some time, it might sound like a flock of birds. LOL