StreetStangs.net  

Go Back   StreetStangs.net > Technical > Ford Pushrod Tech (5.0 & 5.8)
FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-20-2012, 03:01 PM   #1
H8IMPORTS
Member
 
Join Date: Jan 2011
Posts: 82
Cam help?? Maybe?

I have a 83 5.0. Has a 306 Trick Flow heads (early style they don't say trick flow on them) Victor j/r intake, 750 cfm carb, 4.10 gears, C4 and a 2200 stall. I'm fixing to put a 8" 3500 converter and a 175-250 shot. Starting out at 175 and don't know how high I plan to go. lol I have a B303 cam with 1.6 rr's. The motor was built 10-15 years ago by OK Performance in Gardendale. It runs pretty good. It will run 7.80's @ 86 mph. I just want more. The bottom end was built with good parts when it was made so the only down fall is I don't know how big of a cam I can go unless I pull the heads and look at the pistons. If I have to I will. I talked to Trick Flow and they said to run the Trick flow stage 2. He said as long as it has a flat top piston I could run the Stage 2 without checking the Piston to valve clearance. Besides the TF Stage 2 anybody else know of a cam I could use?
__________________
Just your average 92 Coupe with a Cam Only 302!

Drive it like you stole it because everyone dies but not everyone lives!
H8IMPORTS is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:01 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.