07-09-2010, 04:45 PM | #51 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Yep for the J3 module chips you will need the chip burner and the adapter board that goes in between. The J3 modules run about $60 ea. You can use the QH to datalog and get then tune right and then burn the binary to a chip.
EEC-Analyzer will be used to run the datalogs through and it will make changes that you can save and write back to the QH.
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
|