01-18-2012, 09:14 AM | #11 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
I think the runners are a little longer, which would probably be beneficial to the 308 cubic inches. I'd try the trick flow. Use the Victor 5.0 on a 347+ or if you're gonna turn the 308 to 7500-8000.
|
01-23-2012, 04:26 PM | #12 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
I am not familiar with the efi stuff but I would think longer runners would add more torque down low and it would add a few more rpm to the power band. Is this correct or am i guessing again?lol
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
01-24-2012, 06:41 AM | #13 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Shorter the runner, the higher the rpm range
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
01-24-2012, 07:20 AM | #14 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Thinking I didnt ask that correctly. What I was trying to ask was longer would start the power band earlier widenening the rpm range.
adding a few more working rpm from beginning to end. like say 1000 to 5500 instead of 3500 to 7000 which would be a 1000 rpm added to the width (band). is this correct?
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 01-24-2012 at 07:25 AM. |
01-24-2012, 08:18 AM | #15 |
Member
Join Date: Jan 2011
Posts: 82
|
What is everybody's thoughts on the Spyder Intake? I know the single plane intakes work well on Carb cars so it seems that it should work on EFI cars as well. I really want a top end car. IF I do any racing it's mostly top end runs on the Interstate in Mexico. I plan to pull the Trick Flow off my GT car and I may put a Edelbrock Preformer on there and get the car ready to sell. So I will have the Trick Flow R series, Victor 5.0 and the Spyder. I may still go with the R series. Guess I want to know the pros and cons. lol
Thanks
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! Last edited by H8IMPORTS; 01-24-2012 at 03:23 PM. Reason: rewrote my question. |
01-25-2012, 08:25 AM | #16 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
If you really want a top-end car, you might consider more cam than what you have. The X-303 cam is decent, but it's probably not going to pull any farther than 6500, and that would be with some pretty good springs and better than stock lifters. Also, the windsor jr heads leave something to be desired, especially in stock form...are they worked at all? Heads and cam are the key to a top-end car.
The spyder is easy to install and remove, so it would definitely be worth a try...but I would get a cam from Ed Curtis asap. |
01-25-2012, 08:44 AM | #17 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
01-25-2012, 08:46 AM | #18 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
01-25-2012, 09:36 AM | #19 |
Boost! Its wats 4 dinner
Join Date: Mar 2009
Location: Bridgeport,AL
Posts: 811
|
If he still has the stock rev limiter then changing cams is a waste. cause the x pulls to about 6500 as coupe said but the stock rev limiter is set at 6250. I had the x cam in my other car and loved it. Since i have changed to the Steeda 19 i hate it. The car dont pull nowhere near as hard. im goin to change it as soon as i find a good cam.
__________________
06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD |
01-25-2012, 10:04 AM | #20 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Ok thx.I really need to catch up on the efi intakes.Maybe look at some similar setups with dif intakes on dyno graphs to get me a visual on how they react.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
|
|