11-05-2011, 06:08 AM | #1 |
Member
Join Date: Jan 2011
Posts: 82
|
GM 6 speed into a ford.
My 92 coupe needs a trans and I know where I can get a 93 lt1 6 speed real cheap. I have heard of people putting them into fords. Does anybody know what all I would have to change? I know the bellhousing but what else? And would it be worth it?
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
11-05-2011, 08:27 AM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
driveshaft, bellhousing, crossmember, etc.
Same if you install a cobra 6-speed. They are both t-56's
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
11-05-2011, 09:24 AM | #3 |
Member
Join Date: Jan 2011
Posts: 82
|
Where can I get a bellhousing? I guess call tremic?
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
11-05-2011, 10:16 AM | #4 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
D&D motorsports.
Pretty sure you will need a clutch fork as well
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
11-05-2011, 10:42 AM | #5 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Are the input shafts the same? I know the GM T-5 and Ford T-5 had different input shafts, and IIRC, output shafts. Different splines.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
11-05-2011, 03:37 PM | #6 |
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
arn't the F-body transmissions at a 15 degree rotated angle or something to allow the torque arm to be bolted on?
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS |
11-05-2011, 04:20 PM | #7 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Could be. I didn't think about that
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
11-05-2011, 05:48 PM | #8 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
Gm trans are 26 spline input and hydraulic clutch. That's the main two differences off the top of my head. Not worth it to swap over imo
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
11-06-2011, 07:58 PM | #9 |
Member
Join Date: Jan 2011
Posts: 82
|
Thanks guys but the deal fell through so I wont be swapping it over. Lol. I was going to get a parts car 93 LT1 car and I decided against it. But thanks again!
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
|
|