03-25-2009, 06:01 PM | #1 |
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
'94 mustang gt not firing need help????????
Like the title says got the motor installed and drove for bout 300 miles or so back and forth to work etc... Coming home leaving a stop sign the engine backfired twice then picked back up. Car went bout 1/4 mile or so started skipping and died. Has yet to fire again. So here is whats been done/tested. coil has been swapped with working coil and coil has power to it. dizzy was just swapped today with no luck. control module on the pass. fender has been tested in the cobra works fine. cap and button have been replaced with new ones and have also checked the grounds. checked fuses in engine bay and has fuel pressure. open for ideas now......
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing |
03-25-2009, 06:31 PM | #2 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Your ECU could have crapped out on you.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
03-25-2009, 06:50 PM | #3 |
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
yeah that seems to be what i'm getting from searching online or eec relay???? would be nice if could check the cpu....
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing |
03-25-2009, 06:50 PM | #4 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Have you checked the pickup in the distributor? Is the cap and rotor good?
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
03-25-2009, 06:53 PM | #5 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Quote:
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
03-25-2009, 07:00 PM | #6 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
take the one out of the cobra. All it takes is a 10 mm socket (and your dad not around since it is his car )
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
03-25-2009, 07:01 PM | #7 |
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
anyone got a spare computer laying around???? has a A9L in it.
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing |
03-25-2009, 07:02 PM | #8 |
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
yeah and i could use the chip tooo he would love that
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing |
03-25-2009, 07:06 PM | #9 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
an A9L? Did you do the swap? In that case don't swap EEC's the wiring is different between fox's and sn95's
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
03-25-2009, 07:10 PM | #10 |
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
seems like thats what i put in it awhile back to bad i sold the other 1
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing |
|
|