1998 gt

Whitepony98 · 10-18-2010, 08:05 PM

I got some numbers at steel friday 14.9 @ 92.47 my motor is all stock with 230k miles. Im not happy with it, but ive got somthing on the way. I found a 1996 cobra with 79k that is was wrapped around a telephone pole. The owner of the cobra is letting me get everthing to make my gt a cobra except the wheels three were broken. Ive got some questions will my computer and wiring harness suport the 4v motor and will my fuel system do the job because i can get anything off of it i just need to know what i need

Whitepony98 · 10-18-2010, 08:21 PM

all cleaned upstang98.jpg stang98.jpg

yellowSVT · 10-18-2010, 08:26 PM

nice ride!

QWKSNKE · 10-18-2010, 09:12 PM

Are you getting all of the drivetrain? I think you will need the wiring because of some sensor difference.

It would actually be best to have the cars side by side, and move EVERYTHING over

QWKSNKE · 10-18-2010, 09:15 PM

oh yeah.. 92mph with that ET tells me you were spinning. Working on getting some traction and you will see that ET drop

Whitepony98 · 10-18-2010, 10:05 PM

The cars will be side by side to do the swap and im not using the drive train because my trany is good and the axles were broke on the rear end from the wreck so im using the motor and what ever else i need to make it work// so i can use my computer but use the cobra engine harness and what about the fuel system cus i can get any thing i need off the cobra oh and lee i spin a little but my r/t was .599 i know horrible i would like to see mid 14s with the stock setup before i drop the heart of a snake in it

QWKSNKE · 10-19-2010, 07:07 AM

use the cobra computer.
As far as fuel system goes, you can probably use your pump but everything else will probably change

Whitepony98 · 10-19-2010, 02:34 PM

well i bet all this wiring is going to be fun especialy taking the dash out but as soon as i start to do the swap ill post pics

JUICED SVT · 10-19-2010, 07:04 PM

You shouldn't have do any wiring in the dash. Just swap the engine harness and computer if you are staying 5 spd.

rtusnake · 10-19-2010, 08:48 PM

I sort of know the guy your getting the cobra from. Fuel is the same other than the injectors. Should be a pretty straight forward swap

10-18-2010, 08:05 PM	#1
Whitepony98 Junior Member Join Date: Jun 2009 Location: Ohatchee ,AL Posts: 24	1998 gt I got some numbers at steel friday 14.9 @ 92.47 my motor is all stock with 230k miles. Im not happy with it, but ive got somthing on the way. I found a 1996 cobra with 79k that is was wrapped around a telephone pole. The owner of the cobra is letting me get everthing to make my gt a cobra except the wheels three were broken. Ive got some questions will my computer and wiring harness suport the 4v motor and will my fuel system do the job because i can get anything off of it i just need to know what i need __________________ *98 GT sold* *03 F-150 King Ranch*

10-18-2010, 08:21 PM	#2
Whitepony98 Junior Member Join Date: Jun 2009 Location: Ohatchee ,AL Posts: 24	pic all cleaned upstang98.jpg stang98.jpg __________________ *98 GT sold* *03 F-150 King Ranch*

10-18-2010, 08:26 PM	#3
yellowSVT Senior Member Join Date: Mar 2007 Location: anniston/saks Posts: 1,459	nice ride! __________________ http://i171.photobucket.com/albums/u...DSC02715-1.jpg 2004 cobra MGW shifter,spec 3+ clutch, billet flywheel, 3.75 upper pulley, banssanni exaust, 3.4 whipple, 60lb injectors, fore rails and hat, gt40 pumps, dual bypass heat exchanger. 660hp/600tq http://s171.photobucket.com/albums/u...t=M2U00182.flv 2012 f150 4x4 5.0 blk 2012 rzr LE S orange 2012 rzr LE silver/blk 2003 DSG lightning 2001 ford focus ZX3 silver

10-18-2010, 09:12 PM	#4
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Are you getting all of the drivetrain? I think you will need the wiring because of some sensor difference. It would actually be best to have the cars side by side, and move EVERYTHING over __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

10-18-2010, 09:15 PM	#5
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	oh yeah.. 92mph with that ET tells me you were spinning. Working on getting some traction and you will see that ET drop __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

10-18-2010, 10:05 PM	#6
Whitepony98 Junior Member Join Date: Jun 2009 Location: Ohatchee ,AL Posts: 24	The cars will be side by side to do the swap and im not using the drive train because my trany is good and the axles were broke on the rear end from the wreck so im using the motor and what ever else i need to make it work// so i can use my computer but use the cobra engine harness and what about the fuel system cus i can get any thing i need off the cobra oh and lee i spin a little but my r/t was .599 i know horrible i would like to see mid 14s with the stock setup before i drop the heart of a snake in it __________________ *98 GT sold* *03 F-150 King Ranch*

10-19-2010, 07:07 AM	#7
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	use the cobra computer. As far as fuel system goes, you can probably use your pump but everything else will probably change __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

10-19-2010, 02:34 PM	#8
Whitepony98 Junior Member Join Date: Jun 2009 Location: Ohatchee ,AL Posts: 24	well i bet all this wiring is going to be fun especialy taking the dash out but as soon as i start to do the swap ill post pics __________________ *98 GT sold* *03 F-150 King Ranch*

10-19-2010, 07:04 PM	#9
JUICED SVT Senior Member Join Date: Mar 2007 Location: BOAZ,AL. Posts: 220	You shouldn't have do any wiring in the dash. Just swap the engine harness and computer if you are staying 5 spd. __________________ 1999 GT VERT 4V conversion

10-19-2010, 08:48 PM	#10
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	I sort of know the guy your getting the cobra from. Fuel is the same other than the injectors. Should be a pretty straight forward swap __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")