01-15-2012, 06:48 PM | #1 |
Senior Member
Join Date: Jul 2005
Location: enterprise,al
Posts: 127
|
what push rods?
using 2031 with stock rockers and the push rods are to short. has anyone had this problem if so what you did you use.
stock heads stock rockers w/crane #2031
__________________
WHISNANT MUSTANGS.COM Enterprise,AL. 334-389-0508 |
01-16-2012, 08:37 AM | #2 |
Member
Join Date: Jan 2011
Posts: 82
|
I have always used Motorsport cams and they use stock push rods. I have used luniti as well and just used stock push rods. Have you thought about calling Crane and asking them?
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
01-16-2012, 10:47 AM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
something is off. stocklength pushrods should work for you.
Using factory roller lifters, correct?
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
01-16-2012, 05:57 PM | #4 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Are you SURE those are the stock pushrods? They should measure 6.25".
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
01-16-2012, 07:58 PM | #5 |
Senior Member
Join Date: Jul 2005
Location: enterprise,al
Posts: 127
|
I have ordered a pushrod adjusting tool from summit. never had this problem before either.
__________________
WHISNANT MUSTANGS.COM Enterprise,AL. 334-389-0508 |
|
|