project Granny Sled - Page 10

93cobra1928 · 06-03-2010, 05:11 PM

[QUOTE=ncontt;205301]haha, would like at least 550HP to the tiresQUOTE]

You should get that with ease with that setup

ncontt · 06-04-2010, 03:26 PM

I hope so, just wondering about the cobra upper/lower....should do "ok", but we'll see I guess.

ncontt · 09-12-2010, 08:25 PM

IT's ALIIIIIIIIIIIIVVVVVVVVVVVVVEEEEEEEEEEEE!!!!

We got it cranked and running today!!!

Things left to do include, reinstall the pass. side strut/coilovers, install braided brake lines, get an alignment, get it tuned, get gauges wired back up, get heat blanket for turbo, get filter for turbo inlet (not much room here BTW), a $H!T-TON of cleaning to be done, I'm leaving something else out...but not sure what!

ncontt · 09-12-2010, 08:33 PM

oh ya, get exhaust on there!!! Right now it's loud as HADES....just the downpipe (3.5"), then a short piece that bolts onto the downpipe. Still trying to decide if I want to go with duals or leave the race muffler on there (3.5"), any input/suggestions?

rtusnake · 09-12-2010, 10:19 PM

Cheaper to do the single muffler. Any pics?

86GTPONY · 09-12-2010, 10:30 PM

Quote:

Originally Posted by rtusnake

Cheaper to do the single muffler. Any pics?

I would stay with a single and use a non-chambered muffler (like a Magnaflow) or some other flow-through design.

ncontt · 09-13-2010, 05:01 AM

I'm going to mock up the muffler and get it welded up today I guess, then we'll go from there once I see how loud it is....I'll try and get some pics/video today too!

89five0Gt · 09-13-2010, 08:43 AM

its been a long time coming....we need pics man !!!

CrazyInBlack · 09-13-2010, 09:18 AM

Quote:

Originally Posted by 89five0Gt

its been a long time coming....we need pics man !!!

And, a vid

ncontt · 09-13-2010, 04:50 PM

got exhaust welded up today and put it on...I think I have a bad exhaust leak somewhere but I can't narrow it down b/c I realized that there is supposed to be a valve seat where the wastegate mounts between the wastegate and the mounting flange....

, so I have to find one of those....also got air inlet filter mounted and got a new rubber grommet from FORD (read: "they rapin' ERRRBODY up in here!!!" for the gas filler neck, still need to install strut on pass side(DONE), SS brake lines(DONE), and bleed brakes, cleanup, misc. wiring of gauges....

06-03-2010, 05:11 PM	#91
93cobra1928 Dazed and Confused Join Date: Mar 2009 Location: Northport, Al Posts: 778	[QUOTE=ncontt;205301]haha, would like at least 550HP to the tiresQUOTE] You should get that with ease with that setup __________________ Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards

06-04-2010, 03:26 PM	#92
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	I hope so, just wondering about the cobra upper/lower....should do "ok", but we'll see I guess. __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

09-12-2010, 08:25 PM	#93
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	IT's ALIIIIIIIIIIIIVVVVVVVVVVVVVEEEEEEEEEEEE!!!! We got it cranked and running today!!! Things left to do include, reinstall the pass. side strut/coilovers, install braided brake lines, get an alignment, get it tuned, get gauges wired back up, get heat blanket for turbo, get filter for turbo inlet (not much room here BTW), a $H!T-TON of cleaning to be done, I'm leaving something else out...but not sure what! __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

09-12-2010, 08:33 PM	#94
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	oh ya, get exhaust on there!!! Right now it's loud as HADES....just the downpipe (3.5"), then a short piece that bolts onto the downpipe. Still trying to decide if I want to go with duals or leave the race muffler on there (3.5"), any input/suggestions? __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

09-12-2010, 10:19 PM	#95
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	Cheaper to do the single muffler. Any pics? __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

09-13-2010, 05:01 AM	#97
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	I'm going to mock up the muffler and get it welded up today I guess, then we'll go from there once I see how loud it is....I'll try and get some pics/video today too! __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

09-13-2010, 08:43 AM	#98
89five0Gt Senior Member Join Date: Dec 2006 Location: behind Skillet Posts: 1,356	its been a long time coming....we need pics man !!!

09-13-2010, 04:50 PM	#100
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	got exhaust welded up today and put it on...I think I have a bad exhaust leak somewhere but I can't narrow it down b/c I realized that there is supposed to be a valve seat where the wastegate mounts between the wastegate and the mounting flange...., so I have to find one of those....also got air inlet filter mounted and got a new rubber grommet from FORD (read: "they rapin' ERRRBODY up in here!!!" for the gas filler neck, still need to install strut on pass side(DONE), SS brake lines(DONE), and bleed brakes, cleanup, misc. wiring of gauges.... __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Last edited by ncontt; 09-13-2010 at 09:28 PM.