Opinion on MUFFLERS - Page 3

QWKSNKE · 03-09-2011, 06:21 PM

I ran borla's with an x-pipe on my 93. Great muffler on the street somewhat docile at low rpm's and screams when you are at WOT

86GTPONY · 03-09-2011, 07:46 PM

I love the sound of my spintechs! I run Mac P-specific shorties into a 2 1/2" o/r x-pipe, then I used the factory tailpipes. I used to have the exhaust dumped right at the mufflers, but it was way too loud. Anyway, it's all subject to your opinion, but I find it much more aggressive than an h-pipe w/ flowmaster setup.

1Quik85GT · 03-09-2011, 10:01 PM

Quote:

Originally Posted by blue90lx

So how come 0 balanced. Just wondering can u explain this to me please

less stress on the block. no weight on either ends of the crankshaft..

blue90lx · 03-10-2011, 06:29 PM

Quote:

Originally Posted by 1Quik85GT

less stress on the block. no weight on either ends of the crankshaft..

ok thanxs man

RUQWKNF27 · 03-22-2011, 07:13 PM

I got a set of Spintech Super Pro's Street's I will sale with Flow Tubes $160.00 Sounded good behind a Stroker I once heard...

blue90lx · 03-23-2011, 02:57 PM

Quote:

Originally Posted by RUQWKNF27

I got a set of Spintech Super Pro's Street's I will sale with Flow Tubes $160.00 Sounded good behind a Stroker I once heard...

how long u had these? where you from?

H8IMPORTS · 03-29-2011, 12:16 PM

I had a set of spintechs sportsmans with a X-pipe and they sounded awesome! I had turndowns with un-equal length headers and when I sold the car I pulled the muffers off and put a set of flows on it to sell it because I wanted to keep the mufflers. lmao. I still have them in the basement and I plan on running them on my black coupe I;m fixing to build. I wish I had a sound clip of my car but I don't. It sounded a lot like flows at idle or driving around. Not quiet but close but when you stabbed off into it it sounded different and it sounded FREAKING AWESOME! I loved it! I woould say SpinTech. No wait I would say go with Borla because I want my car to sound different than yours! lol J/K!

BLOWN95GT · 03-29-2011, 04:26 PM

spintech!
http://www.youtube.com/watch?v=O0t8P...eature=related

here is a video of my old car with spintech pro streets with long tube headers and a Dr. gas o/r x-pipe.
http://www.youtube.com/watch?v=vz4k5jXz7vI

CrimsonRacing · 03-29-2011, 05:07 PM

believe it or not.........my '98 has Ford stamped mufflers........

It's the most unusual sound I've ever heard.....I cannot describe it but to say it aggrivates me and they will be changed when I do the new exhaust system......

03-09-2011, 06:21 PM	#21
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	I ran borla's with an x-pipe on my 93. Great muffler on the street somewhat docile at low rpm's and screams when you are at WOT __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

03-09-2011, 07:46 PM	#22
86GTPONY Gone but not forgotten Join Date: May 2008 Location: 4/08/2013. Went to the man upstairs. RIP Posts: 955	I love the sound of my spintechs! I run Mac P-specific shorties into a 2 1/2" o/r x-pipe, then I used the factory tailpipes. I used to have the exhaust dumped right at the mufflers, but it was way too loud. Anyway, it's all subject to your opinion, but I find it much more aggressive than an h-pipe w/ flowmaster setup. __________________ *-Don* 86GT (sleeping in the garage for now) 87 T-bird Turbo Coupe (daily driver) 87 Ranger ($100 work truck) Meat is murder!... Tasty, tasty murder.

03-22-2011, 07:13 PM	#25
RUQWKNF27 Junior Member Join Date: Aug 2009 Posts: 4	I got a set of Spintech Super Pro's Street's I will sale with Flow Tubes $160.00 Sounded good behind a Stroker I once heard... __________________ 90 Coupe 347 T-5

03-29-2011, 12:16 PM	#27
H8IMPORTS Member Join Date: Jan 2011 Posts: 82	I had a set of spintechs sportsmans with a X-pipe and they sounded awesome! I had turndowns with un-equal length headers and when I sold the car I pulled the muffers off and put a set of flows on it to sell it because I wanted to keep the mufflers. lmao. I still have them in the basement and I plan on running them on my black coupe I;m fixing to build. I wish I had a sound clip of my car but I don't. It sounded a lot like flows at idle or driving around. Not quiet but close but when you stabbed off into it it sounded different and it sounded FREAKING AWESOME! I loved it! I woould say SpinTech. No wait I would say go with Borla because I want my car to sound different than yours! lol J/K! __________________ Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives!

03-29-2011, 04:26 PM	#28
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	spintech! http://www.youtube.com/watch?v=O0t8P...eature=related here is a video of my old car with spintech pro streets with long tube headers and a Dr. gas o/r x-pipe. http://www.youtube.com/watch?v=vz4k5jXz7vI Last edited by BLOWN95GT; 03-29-2011 at 05:08 PM.

03-29-2011, 05:07 PM	#29
CrimsonRacing Comfortably NUMB Join Date: Dec 2004 Location: ALIVE AGAIN Posts: 1,704	believe it or not.........my '98 has Ford stamped mufflers........ It's the most unusual sound I've ever heard.....I cannot describe it but to say it aggrivates me and they will be changed when I do the new exhaust system...... __________________ '02 GT....just another money pit.