05-05-2010, 05:19 PM | #1 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
Windsor Sr.200 heads
Does anyone know anything about them? what hp will they support? would they be better than my performers?
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
05-05-2010, 05:38 PM | #2 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
Running them on my car right now, don't know what hp level they will suppport. The performer is a good head and the weight savings is good.
If this is on your 351 stroker then I would say you need at least a Performer RPM and the Windsor Sr's would probably work well with the larger runner and 2.02 valve. My 2cents anyway
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
05-05-2010, 07:21 PM | #3 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
I agree. It's a bigger port, valve, etc... probably more suited to the Windsor motor unkless the Performer has some work done to it.
If it were me, I would sell BOTH sets and get either the AFR185's in the forsale section (great head) or look for a used VicJr, Canfield, Trickflow, or something along those lines. |
|
|