roller rocke questions

tayzoid1 · 01-14-2009, 03:14 PM

ok i got me a set of scorpion 1.6 roller rockers problem is they are stub mount i have pedistal mount i know crane makes a conversion kit but its a lil on the exspensive side is there any otheroption or do i just need to sell these and buy some pedistal mount roller rockers

militarymustang88gt · 01-14-2009, 04:23 PM

you could buy a set of trick flow heads or afrs or something of the sort. i mean you could get a used set for a reasonable price than you can have all of the good stuff.

tayzoid1 · 01-14-2009, 04:28 PM

i have like 5 dolla's lol and i am in college i dont have anywhere near the cash it takes for some afr's i have wanted a set for about 3yrs now but never enuff dough

tayzoid1 · 01-14-2009, 04:29 PM

i was just wonderin if i could get the studs and screw them in or do i have to have the big fancy crane cam conversion kit

EHardy1971 · 01-14-2009, 04:41 PM

You can get the screw in studs,but you have to get the mounting bosses on the heads milled down a bit.

QWKSNKE · 01-14-2009, 05:12 PM

yeah you are probably looking at least $100 to get your heads setup for stud mount rockers

tayzoid1 · 01-14-2009, 05:28 PM

crane cams make a kit that says no milling required srcrew in and bolt on and go

tayzoid1 · 01-14-2009, 05:29 PM

i was just wondering if there is any other way i might be able to make these work ohh well i guess they are goin on sale

1Quik85GT · 01-14-2009, 07:40 PM

you'd be wise to keep them. what heads do you have? If they are stock, get rid of them and just go with pedestal, until you get a set of heads that are already setup for studs

QWKSNKE · 01-14-2009, 07:45 PM

he has stock heads

01-14-2009, 03:14 PM	#1
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	roller rocke questions ok i got me a set of scorpion 1.6 roller rockers problem is they are stub mount i have pedistal mount i know crane makes a conversion kit but its a lil on the exspensive side is there any otheroption or do i just need to sell these and buy some pedistal mount roller rockers __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

01-14-2009, 04:23 PM	#2
militarymustang88gt Senior Member Join Date: Jun 2007 Location: bham and auburn Posts: 337	you could buy a set of trick flow heads or afrs or something of the sort. i mean you could get a used set for a reasonable price than you can have all of the good stuff. __________________ finally got my avatar. it is the white one.

01-14-2009, 04:28 PM	#3
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	i have like 5 dolla's lol and i am in college i dont have anywhere near the cash it takes for some afr's i have wanted a set for about 3yrs now but never enuff dough __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

01-14-2009, 04:29 PM	#4
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	i was just wonderin if i could get the studs and screw them in or do i have to have the big fancy crane cam conversion kit __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

01-14-2009, 04:41 PM	#5
EHardy1971 Trunk Monkey Join Date: Jun 2007 Location: Home Posts: 5,708	You can get the screw in studs,but you have to get the mounting bosses on the heads milled down a bit. __________________ Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS

01-14-2009, 05:12 PM	#6
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	yeah you are probably looking at least $100 to get your heads setup for stud mount rockers __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

01-14-2009, 05:28 PM	#7
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	crane cams make a kit that says no milling required srcrew in and bolt on and go __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

01-14-2009, 05:29 PM	#8
tayzoid1 5.slo stanger Join Date: Jan 2007 Location: oxford alabama Posts: 735	i was just wondering if there is any other way i might be able to make these work ohh well i guess they are goin on sale __________________ no mustangs anymore but i do have a 1jz swapped 83 supra

01-14-2009, 07:40 PM	#9
1Quik85GT Senior Member Join Date: Apr 2005 Posts: 895	you'd be wise to keep them. what heads do you have? If they are stock, get rid of them and just go with pedestal, until you get a set of heads that are already setup for studs

01-14-2009, 07:45 PM	#10
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	he has stock heads __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy