gear?

waypastcrazy · 06-29-2011, 05:34 AM

Budget gt.28 inch tire.
355? 373? 410?
I am kind of up in the air.
I will be spraying it 150 shot sometimes and n/a somtimes.
Will be street driving alot also.1/8 mile and 1/4 mile at 5800 rpms.
thx for the help in advance.Clyde

waypastcrazy · 06-29-2011, 05:41 AM

Was hoping for some tnt tomorrow but does not look like a go.
Anyways just want to close out with the build specs.
#1 .030 dish top 351w blueprinted by me.

#2 Comp magnum 270 flat tappet with roller rockers and hardened pushrods.degreed in by me to my specs

#3 edelbrock performer intake with a 650 holley dp

#4 1970 ford windsor iron heads ported by me.

#5 c4 auto with guessn 2500 stahl

#6 ford duraspark dizzy rebuilt and recurved by me.
With a msd 6al ignition box

#7 bbk shorties and h pipe with magnaflow mufflers.

SlowJoe · 06-29-2011, 07:07 AM

Try whats in it.

BIGDATOWN · 06-29-2011, 07:12 AM

My vote is 4.10 gears

rtusnake · 06-29-2011, 07:41 AM

4:10 as well

QWKSNKE · 06-29-2011, 09:36 AM

yeah if you are rolling out on a 28" you will need 4.10's to get out of the hole

NO2MORO · 07-13-2011, 06:11 AM

4.10 for sure.

06-29-2011, 05:34 AM	#1
waypastcrazy ADDICTED TO SMALL BLOCKS Join Date: Jan 2007 Location: lookout mt Posts: 1,757	gear? Budget gt.28 inch tire. 355? 373? 410? I am kind of up in the air. I will be spraying it 150 shot sometimes and n/a somtimes. Will be street driving alot also.1/8 mile and 1/4 mile at 5800 rpms. thx for the help in advance.Clyde __________________ http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 06-29-2011 at 05:42 AM.

06-29-2011, 05:41 AM	#2
waypastcrazy ADDICTED TO SMALL BLOCKS Join Date: Jan 2007 Location: lookout mt Posts: 1,757	Was hoping for some tnt tomorrow but does not look like a go. Anyways just want to close out with the build specs. #1 .030 dish top 351w blueprinted by me. #2 Comp magnum 270 flat tappet with roller rockers and hardened pushrods.degreed in by me to my specs #3 edelbrock performer intake with a 650 holley dp #4 1970 ford windsor iron heads ported by me. #5 c4 auto with guessn 2500 stahl #6 ford duraspark dizzy rebuilt and recurved by me. With a msd 6al ignition box #7 bbk shorties and h pipe with magnaflow mufflers. __________________ http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS

06-29-2011, 07:07 AM	#3
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	Try whats in it. __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

06-29-2011, 07:12 AM	#4
BIGDATOWN Senior Member Join Date: Aug 2010 Posts: 221	My vote is 4.10 gears

06-29-2011, 07:41 AM	#5
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	4:10 as well __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

06-29-2011, 09:36 AM	#6
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	yeah if you are rolling out on a 28" you will need 4.10's to get out of the hole __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

07-13-2011, 06:11 AM	#7
NO2MORO Friends Join Date: Dec 2004 Location: Odenville Al. Posts: 589	4.10 for sure.