04-27-2007, 09:02 PM | #1 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Subframes?
I need to know if this is a smart thing to do or not. I put new subframes on the svo and added on to an idea. I tied in the Kmember to the subframes and also used a kmember brace that goes across and under the tranny. You can see some of the pic. Still haven't welded them in yet so its just up there for the idea. The sub's go all the way pass the control arms 1"x2"x76"
Last edited by SvoBrown; 09-29-2007 at 10:44 PM. |
04-27-2007, 09:37 PM | #2 |
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
In theory the more you connect, the stiffer it becomes.
I would go ahead and try it. If you don't like it, you can cut the tabes off.
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS |
04-27-2007, 09:41 PM | #3 |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
What grade fasteners did you use? Is the only mounting point that bolt into the K-member brace? Just "off the cuff", I think you might have a problem with shearing those bolts if you ever get the chassis bound up.
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown Last edited by Sendero; 04-27-2007 at 11:34 PM. Reason: Drop the Y |
04-27-2007, 09:49 PM | #4 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Why you got to ask questions I don't want to answer. I used the head bolts of my last motor. Not the torque to yeild but stock ford bolts for the turbo head. That will be a good test to see if it moves much.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
04-27-2007, 11:37 PM | #5 |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
At best, they are Grade 8 bolts. At worst, they are some special bolt thats only rated for clamping loads (straight up and down) only. Either way, keep a close eye on them because it probably won't be a failure that happens in the next couple of weeks, but one that happens a year down the road when you're not even thinking about them.
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown |
04-28-2007, 05:00 AM | #6 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Why fasten it there instead of the k-member?
|
04-28-2007, 05:44 AM | #7 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
I almost built it as a complete rail to the front but there would be an offset to deal with. Didn't want to rig it without asking some questions and thinking more about it.
I have some 8.8 and some 10.5 bolts at work. I will replace them later this week.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
|
|