My heads are baaack.... - Page 3

Wickd GT · 07-01-2005, 07:19 PM

Well, got the intake back on and the wiring I have figure it out, tomorrow I will have all nice and neat. Then I'll decide if I'm going to the track or go to the Dyno and get a base line so I'll know were the motor is at.

Edgar

QWKSNKE · 07-02-2005, 04:52 AM

dyno first

1Quik85GT · 07-04-2005, 12:31 AM

SHHHIsh.... take it to the track. My motor hasnt ever been dynoed. Take it to the track, thats the best dyno. You can make all the HP in the world and not run worth a crap at the track. Good luck Edgar.

07-01-2005, 07:19 PM	#21
Wickd GT Friends Join Date: Dec 2004 Posts: 1,645	Re: My heads are baaack.... Well, got the intake back on and the wiring I have figure it out, tomorrow I will have all nice and neat. Then I'll decide if I'm going to the track or go to the Dyno and get a base line so I'll know were the motor is at. Edgar

07-02-2005, 04:52 AM	#22
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: My heads are baaack.... dyno first __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

07-04-2005, 12:31 AM	#23
1Quik85GT Senior Member Join Date: Apr 2005 Posts: 895	Re: My heads are baaack.... SHHHIsh.... take it to the track. My motor hasnt ever been dynoed. Take it to the track, thats the best dyno. You can make all the HP in the world and not run worth a crap at the track. Good luck Edgar.