Got new numbers on motor....

Wickd GT · 11-25-2005, 09:59 PM

Went to the track tonight at MMP, did not make my first pass until 8pm cause they were in doubt if they were going to have Test and Tune due to the cold, but people started to show up, so Right off the trailer since the Dyno, car ran on the left lane:

60ft 1.56
330 4.59
1/8 7.11
mph 97.15
1/4 11.20
mph 119.79

next pass had to abort, car sent me to the wall so had to lift, next pass, I never open the hood once:

60ft 1.58
330 4.619
1/8 7.14
mph 97.26
1/4 11.22
mph 119.77
This motor is putting down some serious power down, if I had mess with it a bit it'll probably run faster. I decided not to spray it for safety reason, track would not hold it, and probably hit the wall, 44* temperature. I'm trying to convince Anthony to open the track these last weeks, on Sundays for test and tune from 1-5pm. I'm happy, the motor is putting some good hp, can't wait to spray it...

Edgar

mustang1549 · 11-25-2005, 10:06 PM

glad everything is working better now for you edgar

slvrbullit · 11-25-2005, 10:19 PM

Nice times Edgar, I see 9's again in your future on the sauce.

QWKSNKE · 11-26-2005, 03:03 AM

Italian LX · 11-26-2005, 06:38 AM

Great numbers, Edgar.

Wickd GT · 11-26-2005, 06:55 AM

Guys, you should hear this motor in the burn out, now that it has the ultr flows and the X pipe, it does a burn out effortlessly. The torque converter from PTC works great, and that is on the bit tight side, can you imaging with a 4200 stall converter! I was launching it at 3200rpm in the 2 step, it gets in the 2 step fast. Lee did you get your tranny fix? I'm going to talk to Anthony to see if he has T&T on the next Sunday left before the year is out. If does the first T&T will be the 4 of Dec, we should get a group to come down to MMP if it happens.

Edgar

QWKSNKE · 11-26-2005, 07:00 AM

Quote:

Originally Posted by Wickd GT

. Lee did you get your tranny fix?

Edgar

not yet. Waiting on a money tree to bloom somewhere

NightHawk756 · 11-26-2005, 10:03 AM

Quote:

Originally Posted by Wickd GT

. The torque converter from PTC works great, and that is on the bit tight side, can you imaging with a 4200 stall converter! I was launching it at 3200rpm in the 2 step, it gets in the 2 step fast.

Yep, I had a PTC 4200 stall in my coupe. I loved it. It was also pretty tight for awhile but started loosening up after about 20 runs. Congrats Edgar!!

coupe · 11-26-2005, 09:25 PM

97mph on motor is looking good in the 1/8

What are you looking for on the gas in the 1/8???

My buddy's turbo 347 went 6.88 @ 108 the other night; 18 psi... Next pass, broke a piston. Gary went 6.70 @ 108...then yaked his Cometics

Wickd GT · 11-26-2005, 09:39 PM

Car has been before 6.21. I'm trying for 6.10s or lower, as long as the car runs consistent 9.70s I'll be happy.

Edgar

11-25-2005, 09:59 PM	#1
Wickd GT Friends Join Date: Dec 2004 Posts: 1,645	Got new numbers on motor.... Went to the track tonight at MMP, did not make my first pass until 8pm cause they were in doubt if they were going to have Test and Tune due to the cold, but people started to show up, so Right off the trailer since the Dyno, car ran on the left lane: 60ft 1.56 330 4.59 1/8 7.11 mph 97.15 1/4 11.20 mph 119.79 next pass had to abort, car sent me to the wall so had to lift, next pass, I never open the hood once: 60ft 1.58 330 4.619 1/8 7.14 mph 97.26 1/4 11.22 mph 119.77 This motor is putting down some serious power down, if I had mess with it a bit it'll probably run faster. I decided not to spray it for safety reason, track would not hold it, and probably hit the wall, 44* temperature. I'm trying to convince Anthony to open the track these last weeks, on Sundays for test and tune from 1-5pm. I'm happy, the motor is putting some good hp, can't wait to spray it... Edgar

11-25-2005, 10:06 PM	#2
mustang1549 Friends Join Date: Jan 2005 Location: FOB Sharana, Afghanistan Posts: 1,601	Re: Got new numbers on motor.... glad everything is working better now for you edgar

11-25-2005, 10:19 PM	#3
slvrbullit Super Moderator Join Date: Dec 2004 Location: on the water Posts: 1,280	Re: Got new numbers on motor.... Nice times Edgar, I see 9's again in your future on the sauce. __________________ 2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles

11-26-2005, 03:03 AM	#4
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Got new numbers on motor.... __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

11-26-2005, 06:38 AM	#5
Italian LX Daddy x4 ...we're done Join Date: Dec 2004 Location: Oxford, AL Posts: 11,551	Re: Got new numbers on motor.... Great numbers, Edgar. __________________ -Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring

11-26-2005, 06:55 AM	#6
Wickd GT Friends Join Date: Dec 2004 Posts: 1,645	Re: Got new numbers on motor.... Guys, you should hear this motor in the burn out, now that it has the ultr flows and the X pipe, it does a burn out effortlessly. The torque converter from PTC works great, and that is on the bit tight side, can you imaging with a 4200 stall converter! I was launching it at 3200rpm in the 2 step, it gets in the 2 step fast. Lee did you get your tranny fix? I'm going to talk to Anthony to see if he has T&T on the next Sunday left before the year is out. If does the first T&T will be the 4 of Dec, we should get a group to come down to MMP if it happens. Edgar

11-26-2005, 09:25 PM	#9
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Re: Got new numbers on motor.... 97mph on motor is looking good in the 1/8 What are you looking for on the gas in the 1/8??? My buddy's turbo 347 went 6.88 @ 108 the other night; 18 psi... Next pass, broke a piston. Gary went 6.70 @ 108...then yaked his Cometics __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

11-26-2005, 09:39 PM	#10
Wickd GT Friends Join Date: Dec 2004 Posts: 1,645	Re: Got new numbers on motor.... Car has been before 6.21. I'm trying for 6.10s or lower, as long as the car runs consistent 9.70s I'll be happy. Edgar