07-10-2007, 08:30 AM | #1 |
Member
Join Date: Apr 2007
Posts: 52
|
Flat Tappet to Roller Conversion Easy??
Guys I need some help. My Gt 350 car/project came with an extgra full roller block assembly. Well...good..because dude lied about the motor and its grenaded. So my question is.. I was told by a guy locally all my upper end flat-tappet motor (the heads, intake, carb, etc...) will bolt on to my complete roller block assembly and that the only difference was like the damn $30 push rods or something.
Can someone please chime in on how I can take all my crap off the flat-tappet motor and put it on my roller block? thanks guys. |
07-10-2007, 12:29 PM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
the difference between roller and non roller is the lifter valley and cam. As far as heads, intake, etc it is the same. If you don't have the stock stuff for the roller block you will need a roller cam and roller lifters. Everything else off the 84 model will bolt up
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|