09-13-2007, 02:19 PM | #1 |
Junior Member
Join Date: Sep 2007
Location: north western ohio
Posts: 11
|
4.6 swap into 1965 fastback
I am looking for information from anyone that has done this type of swap.
I have been out of the car hobby for a while and am just getting back in . I have a 2001 gt 4.6 drop out with all wiring for stock 01 mustang and would like to find someone to help elmenate what is not needed for this swap or would an after market peocessor be the way to go? any help would be great. |
09-13-2007, 02:46 PM | #2 |
pro-jackstand racer
|
maybe this will help pimpis maximus<-----linkage
Upon further review the play on the field has been overturned I looked and there really isn't that much actual "how to" on there sorry, it's still cool as h3ll though!
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ Last edited by ncontt; 09-13-2007 at 02:57 PM. |
09-13-2007, 03:23 PM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Seems to me that other than smog stuff you would need everything.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
09-13-2007, 03:45 PM | #4 |
Junior Member
Join Date: Sep 2007
Location: north western ohio
Posts: 11
|
everything is pretty general term i probly should have said i have the stock harness and there are connectors that i do not know what they attach too .
I need to strip the harness down to the bare min and make the engine run like it should , IE... ecm imputs and gauge imputs wire color and pin number would also help. any ideas? |
09-13-2007, 06:04 PM | #5 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
Which harness do you have? Do you have the engine bay harness only? or do you have some of the other harnesses such as the fuel pump harness? One thing to remember is that 99+ mustangs had a variable voltage fuel system instead of a return style like the pre-99's. So you will want to consider that when building your fuel system. That's why in my previous post I mentioned that you pretty much use all of the connectors in the harness (if we are talking engine bay) or at least 90% of them. Does that help answer your question?
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
09-14-2007, 09:15 AM | #6 |
Crusin...
Join Date: Feb 2005
Location: Various Places in Middle AL
Posts: 3,542
|
I know you already have a 4.6 but this might be an easier swap with a 5.0
__________________
Liberal education has nothing to do with liberal or conservative politics. Liberal education is the simple idea of a broad and well-rounded course of study in the humanities, social sciences, sciences, and the arts. The overarching goal is to liberate the mind from ignorance and superstition. |
09-14-2007, 09:25 AM | #7 |
Friends
|
|
09-14-2007, 10:56 AM | #8 |
Junior Member
Join Date: Sep 2007
Location: north western ohio
Posts: 11
|
I have the engine bay harness and the harness that goes thrugh the fire wall to the ecm, I have been told that the harness dont cross and i was not aware of the variable voltage fuel system i will have to check in to that a little more thanks.
|
09-14-2007, 11:27 AM | #9 |
Crusin...
Join Date: Feb 2005
Location: Various Places in Middle AL
Posts: 3,542
|
__________________
Liberal education has nothing to do with liberal or conservative politics. Liberal education is the simple idea of a broad and well-rounded course of study in the humanities, social sciences, sciences, and the arts. The overarching goal is to liberate the mind from ignorance and superstition. |
09-14-2007, 11:47 AM | #10 |
Friends
|
|
|
|