01-11-2013, 11:35 AM | #1 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Lisle 3v broke spark plug remover.
Had my 1st plug stuck in head.
This tool turned a nightmare into a 5 minute fix. Absolutely a must have tool if you change plugs in a 3v.Tool is for 5.4 triton But will work on 4.6. Instructions read to run porcelain pusher untill it bottoms out.I did not because it felt as if it had reached the end of plug. I did not want to chance pushing porcelain into cylinder. And sure enough once I retreived plug the porcelain was at bottom. I am assuming 5.4 plug may have longer tip than 4.6 but not sure. Tool done the job and thats what counts. Part #65600
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 01-11-2013 at 05:28 PM. |
01-11-2013, 12:15 PM | #2 |
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
Yes this tool makes a WORLD of difference. I used it on my king ranch awhile back broke 3 out of 8 plugs and this little tool got em right out. Not sure which plug you got to go back in yours but i went with the new design that has a slightly smaller shank and is suppose to keep the carbon from building up.
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing |
01-11-2013, 12:24 PM | #3 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
After a little investigating on the porcelain pusher
With the plastic washer on the bottom. A 1/8 thick washer under the top head would give correct depth as not to push porcelain too deep.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 01-11-2013 at 12:35 PM. |
01-11-2013, 12:28 PM | #4 | |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Quote:
I lube the hell out of em shank and all with high temp anti seize.lol
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 01-11-2013 at 12:30 PM. |
|
01-11-2013, 04:25 PM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Thanks for including the tool p/n
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|