11-01-2008, 12:57 PM | #1 |
Gone but not forgotten
Join Date: May 2008
Location: 4/08/2013. Went to the man upstairs. RIP
Posts: 955
|
Too close for comfort!
I sarted noticing a vibration in the motor and an oil leak about 3 weeks ago. The oil was leaking from the front main seal. I was kinda pissed, since I just replaced it when I did my head and cam swap. One thing I didn't replace was the harmonic balancer. Well, I said screw it and bought another front main seal and a new balancer. I just got the old one off and noticed it is sitting cock-eyed! If you look at the crappy pic I took you'll notice towards the right it is off by about 1/8th inch and the rubber is falling apart. I'm glad I got to this now, 'cause I'm gonna get it dyno'd in about 2 weeks. Close call!!!
__________________
-Don 86GT (sleeping in the garage for now) 87 T-bird Turbo Coupe (daily driver) 87 Ranger ($100 work truck) Meat is murder!... Tasty, tasty murder. |
11-01-2008, 01:29 PM | #2 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Yeah,that could've been bad!
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
11-01-2008, 03:12 PM | #3 |
Senior Member
Join Date: Oct 2007
Posts: 184
|
good catch and common,I have had a couple balancers key way slot open up quite a bit.I dont know if the metal just got soft or what but a half inch key way slot is a BAD.
|
11-01-2008, 03:27 PM | #4 |
Gone but not forgotten
Join Date: May 2008
Location: 4/08/2013. Went to the man upstairs. RIP
Posts: 955
|
Well, I can be thankful that the crank and key look 100%!!! I have only put a few hundred miles on it since I did my swap, so I don't know if I just missed it, or it was starting to come apart fast. Either way it's scary to think what could have happened if it let loose on a dyno!
__________________
-Don 86GT (sleeping in the garage for now) 87 T-bird Turbo Coupe (daily driver) 87 Ranger ($100 work truck) Meat is murder!... Tasty, tasty murder. |
11-01-2008, 08:30 PM | #5 |
Welcome to America!
|
balancers are so cheap now, I replace mine whenever the timing cover comes off...
__________________
91 GT Convertible 2006 Nissan Titan LE Crew Cab 2014 Peterbilt 337/Marion 22' box |
11-01-2008, 10:15 PM | #6 |
Senior Member
Join Date: Dec 2005
Location: The conservative underground
Posts: 341
|
Buy a good balancer and forget about it, The OEM replacements are junk. ATI or a BHJ
__________________
89LX Hatch 89LX Coupe 89GT 90GT 93GT |
11-01-2008, 11:08 PM | #7 |
Senior Member
Join Date: Oct 2007
Posts: 184
|
|
11-01-2008, 11:22 PM | #8 |
Senior Member
Join Date: Dec 2005
Location: The conservative underground
Posts: 341
|
__________________
89LX Hatch 89LX Coupe 89GT 90GT 93GT |
11-02-2008, 07:25 AM | #9 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
11-02-2008, 08:20 AM | #10 |
Gone but not forgotten
Join Date: May 2008
Location: 4/08/2013. Went to the man upstairs. RIP
Posts: 955
|
Well, I just paid an ass load of bills so with the limited funds and the need to get her back on the road, I got an FRPP for $68. The construction looks like the factory, but it looks like they used polyurethane instead of rubber. I'm sure it'll hold 'till I get something better.
__________________
-Don 86GT (sleeping in the garage for now) 87 T-bird Turbo Coupe (daily driver) 87 Ranger ($100 work truck) Meat is murder!... Tasty, tasty murder. |
|
|