|
06-18-2008, 07:59 AM
|
#1 |
|
Lil' Edgar
Join Date: Dec 2006
Location: Enterprise Al.
Posts: 118
|
Turbo????????
Upper and Lower 93 Cobra intake, not the aftermarket, ported both, upper and lower, Iron GT-40s mild port, Edelbrock roller cam, C&L 73mm mass air, 70mm, throtle body from BBK, UPR cold air kit, shorty head man 1 5/8 headers with a Ypipes x pipe all the way to the tail pipe 2 1/2". 3.73 gears, tire are Street radials 295 50 15, recently rebuilt AOD, B&M shift kit set up by Mike Collins, and a PTC 10" converter with a 2800-3000 stall lock up converter. Just put a set of March pullies...
now wat do i have to do get to be able to run a turbo, i know that my compresions perfect for it 9 to 1... sum help would be nice i'd like for it to be turboed before ffw next year if sum stupid s@#$ doesn't happen next year..
__________________
IT RUNS HAHA!!!!! |
|
|
|
06-18-2008, 08:48 AM
|
#2 |
|
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
You will need a turbo kit of course. Then, you will need larger injectors. Depending on your desired power, the injectors may range from 36 lb/hr up to 60 lb/hr along with either a matching MAF calibration or a custom tune (recommended).
Try "ponydown" or "bgturbo" for a cost-effective turbo-kit. They do very well and don't cost too much. Also plan on having enough fuel pump, a nice regulator, a fuel pressure gauge to monitor, and a wideband O2 setup to keep tabs on A/F ratio. 
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
|
|
|
|
06-18-2008, 08:50 AM
|
#3 |
|
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
Need more fuel, bigger pump and injectors, what are the specs on the cam?
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS |
|
|
|
|
06-18-2008, 11:56 AM
|
#4 |
|
Resident GM Troll
Join Date: Jan 2005
Location: Clanton, AL
Posts: 2,229
 |
you will need:
1 hairdryer 1 roll of ductape 1 box of paper clips 1 really long extension cord 1 can of WD40
__________________
2010 Hyundai Genesis Coupe 2.0T - Bathurst Black Pearl 2007 Ford Fusion SEL (wife's) |
|
|
|
|
06-18-2008, 12:06 PM
|
#5 | |
|
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Quote:
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
|
|
|
|
|
06-18-2008, 04:04 PM
|
#6 |
|
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
keep the boost low. GT40 irons are prone to warp under boost.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP  2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|
|
|
06-18-2008, 04:10 PM
|
#7 |
|
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
Ponydown turbo kit with a 70mm ebay turbo.
42 pound injectors meter for 42's 255lph forced induction pump. good enough for 500rwhp with your combo
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
|
|
|
|
06-21-2008, 10:23 PM
|
#8 | |
|
pro-jackstand racer
Join Date: May 2005
Location: Milner, Ga
Posts: 2,473
 |
Quote:
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~   |
|
|
|
|
 |
|
|
Linear Mode
