02-06-2006, 06:45 PM | #1 |
Bet I red light B4U
|
EEC Analyzer Help Needed
Did the data log from the tweecer, pulled it into the datalog page in the analyzer. What is the next step? How do I get the MAF tab to pull up the file so I can see the MAF curve?
|
02-06-2006, 07:00 PM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: EEC Analyzer Help Needed
just select the tab at the top of the EEC Analyzer screen with the mouse
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
02-06-2006, 07:00 PM | #3 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: EEC Analyzer Help Needed
Click on the MAF tab and use the 'IMPORT' button to pull in the MAF curve that you used in that datalog.
Keep in mind that if you don't already have the MAF curve in the .maf format, you won't be able to get it out of CalEdit using the EXPORT feature -- you'll end up with some funky reading. The way I do it is to enter in the MAF curve into EA manually. You can then use EA's export feature and it will put it in a .maf format that you can use in CalEdit if need be.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
02-06-2006, 08:27 PM | #4 |
Bet I red light B4U
|
Re: EEC Analyzer Help Needed
Since I don't have the flow sheet from Pro-M what should I use for the MAF settings? What does the calculate button do and what should the maf curve 1and maf curve 2 be set at?
|
02-06-2006, 08:31 PM | #5 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: EEC Analyzer Help Needed
Quote:
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
02-06-2006, 08:47 PM | #6 |
Bet I red light B4U
|
Re: EEC Analyzer Help Needed
When I hit calculate it says you need to select a file you want to play first.
|
02-06-2006, 09:53 PM | #7 | |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: EEC Analyzer Help Needed
Quote:
I responded to your MAF question on the Tweecer board.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
|
|
|