i got me a cam what do yall think

swammi · 02-13-2011, 07:05 PM

i got me a crane 440661 flat tappet cam its a .536 intake lift with a .560 exhaust list duration @50 is 238/248 and advertised duration is 296/304 do yall think i will have any problems running this in my windsor setup . it is a d9 (79 model) with stock crank and rods its balanced and bored .040 over with dished pistons i got a set of pro comp 190 cc 2.02 1.60 valves a performer rpm airgap intake a quck fuel q650p carb bbk long tubes with 3.73 in the rear im not racing it just playin and joyriding with it. whats yalls thoughts?

EHardy1971 · 02-13-2011, 09:06 PM

You shouldn't have any valve clearance problems, but it never hurts to clay it. Sounds like it should be a pretty fun combo.

coupe · 02-13-2011, 10:15 PM

Sounds like a nice combo. I think it'll work, but of course you should still check clearance.

waypastcrazy · 02-13-2011, 10:33 PM

Depends on what type of dish piston the 1.9 valves clear good not sure on the 2.02 if is is trough type dish it not the lift its the valve size to be concerned with but even so its a easy fix.sounds like a fun deal maybe even go a little deeper on gears lol have fun.

SMOKNSS · 02-14-2011, 01:43 PM

Quote:

Originally Posted by EHardy1971

You shouldn't have any valve clearance problems, but it never hurts to clay it. Sounds like it should be a pretty fun combo.

Quote:

Originally Posted by coupe

Sounds like a nice combo. I think it'll work, but of course you should still check clearance.

THIS^^^

I always check PTV.... even if everyone swears it will clear. Better to be safe than sorry and with PTV (especially if its a manual car) you will be sorry if the valve(s) hit the piston(s).

Good luck with it.

kraker790 · 02-16-2011, 10:51 PM

Quote:

Originally Posted by SMOKNSS

THIS^^^

I always check PTV.... even if everyone swears it will clear. Better to be safe than sorry and with PTV (especially if its a manual car) you will be sorry if the valve(s) hit the piston(s).

Good luck with it.

I may give this man here hell, but hes a good mechanic... Thats about all u can trust that comes outta his mouth... the rest is usuall

... lol

jonosranger · 02-17-2011, 10:07 AM

Quote:

Originally Posted by kraker790

I may give this man here hell, but hes a good mechanic... Thats about all u can trust that comes outta his mouth... the rest is usuall

... lol

i will agree with that

SMOKNSS · 02-17-2011, 01:44 PM

Quote:

Originally Posted by kraker790

I may give this man here hell, but hes a good mechanic... Thats about all u can trust that comes outta his mouth... the rest is usuall

... lol

Quote:

Originally Posted by jonosranger

i will agree with that

I appreciate that guys/

John knows Im the shit!!! I bet that Transmission we put together is STILL running.

Everyone knows I only speak the truth... just ask me what mods the Camaro has...

rtusnake · 02-17-2011, 03:17 PM

Quote:

Originally Posted by kraker790

I may give this man here hell, but hes a good mechanic... Thats about all u can trust that comes outta his mouth... the rest is usuall

... lol

Lmao, he has you tricked

Weeeeee. . . . I like to swing from everyone else's nuts because I never have a decent car to race!

SMOKNSS · 02-17-2011, 04:07 PM

Quote:

Originally Posted by rtusnake

Lmao, he has you tricked

Michael, its okay.... just pour out the haterade.

02-13-2011, 07:05 PM	#1
swammi magnaflow lover Join Date: Nov 2009 Location: pisgah al Posts: 150	i got me a cam what do yall think i got me a crane 440661 flat tappet cam its a .536 intake lift with a .560 exhaust list duration @50 is 238/248 and advertised duration is 296/304 do yall think i will have any problems running this in my windsor setup . it is a d9 (79 model) with stock crank and rods its balanced and bored .040 over with dished pistons i got a set of pro comp 190 cc 2.02 1.60 valves a performer rpm airgap intake a quck fuel q650p carb bbk long tubes with 3.73 in the rear im not racing it just playin and joyriding with it. whats yalls thoughts? __________________ 97 f150 lariat excab tow rig 93 mustang gt under construction

02-13-2011, 09:06 PM	#2
EHardy1971 Trunk Monkey Join Date: Jun 2007 Location: Home Posts: 5,708	You shouldn't have any valve clearance problems, but it never hurts to clay it. Sounds like it should be a pretty fun combo. __________________ Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS

02-13-2011, 10:33 PM	#4
waypastcrazy ADDICTED TO SMALL BLOCKS Join Date: Jan 2007 Location: lookout mt Posts: 1,757	Depends on what type of dish piston the 1.9 valves clear good not sure on the 2.02 if is is trough type dish it not the lift its the valve size to be concerned with but even so its a easy fix.sounds like a fun deal maybe even go a little deeper on gears lol have fun. __________________ http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS

02-13-2011, 10:15 PM	#3
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Sounds like a nice combo. I think it'll work, but of course you should still check clearance.