04-19-2011, 07:51 PM | #1 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
whats everyones thought on the e303 cam
i think i am about to get one..the motor i have has been bored 30 over..(its a 5.0) it already has crane rollers and springs, so i think it has a aftermarket cam but not sure, I just love the way the 303 sounds.
|
04-19-2011, 07:57 PM | #2 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Need a little more info. What heads and intake are on it for one, and any other mods that you know of.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
04-19-2011, 08:04 PM | #3 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
thats the thing.. i dont know a whole lot, i am going to try to find #'s on everything tomorrow night!! it has and air gap intake and a edelbrock carb..i think its a 650 or 700cfm!
|
04-19-2011, 08:29 PM | #4 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
What year is the car and engine? And is it auto or manual tranny?
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
04-19-2011, 08:34 PM | #5 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
its an 87 notch and the motor is not original to the car..came with a 4cyl i bought the car from the guy the way it is but i have torn it apart trying to fix all the "rigged" stuff. trying to make it right.. it a manual "t5" just rebuilt with ford racing internals.. and feels like a 4.10 rear gear
__________________
87 notchback....and a few mods |
04-19-2011, 09:02 PM | #6 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
When you can, get the casting number off the block. It'll be by the starter mount and will be something like E7TE, E5AE, etc. We need to at least know that to see if it's a roller cam block or not.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
04-20-2011, 07:25 AM | #7 |
Welcome to America!
|
FWIW I won't run another alphabet cam. I spent an extra $50 on my Anderson Ford Motorsport cam and got something much more suited to my combination. I would suggest giving them a call. Just my .02
__________________
91 GT Convertible 2006 Nissan Titan LE Crew Cab 2014 Peterbilt 337/Marion 22' box |
04-20-2011, 07:33 AM | #8 |
日本語
|
he needs a nice lobe'n sound while we are out cruise'n south montgomery for chicks so help him out ok?
i'm sure its an 86+ block but not 100% sure
__________________
Choadiemcsmallballs |
04-20-2011, 01:57 PM | #9 |
Senior Member
Join Date: Jan 2008
Location: sand mountain
Posts: 463
|
I have a b 303 in with 1.7 roller rockers in my car and it cuts up pretty good.
__________________
1990 lx 302 w/trickflow intake, b-303 cam, tremec 3550 ,spec stage 3 clutch, crane 1.7 rockers, under drive pulleys, bbk full length headers, and x-pipe,3:73 gear. AND....... |
04-20-2011, 02:56 PM | #10 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
+1 not to much on the e cam!
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
|
|