04-20-2011, 07:56 PM | #21 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Yep, the E5AE and E6AE heads had those heart shaped chambers, which shrouded the crap out of the valves. The valves were a lot smaller than the E7's too. They're good for about $15 at the scrap metal place on a good day.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
04-20-2011, 08:28 PM | #22 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
ok i looked on the block and found by the starter the # 2H25.. dont know what that is i pulled the valve covers off and found crane cams rollers with the # f3ze-6529-ab...the only casting i found on the heads were 2H19...hate buying stuff i dont know what people did before me
__________________
87 notchback....and a few mods |
04-20-2011, 08:38 PM | #23 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
thanks for everyones help and opinions... i have found out it has a 600 cfm carb, air gap intake, and the rockers are 1.7
__________________
87 notchback....and a few mods |
04-20-2011, 08:43 PM | #24 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
I think you are missing some info on the head and casting numbers.
The roller rockers are 93-95 OEM cobra 1.7's |
04-20-2011, 08:51 PM | #25 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Yep. Those casting numbers don't sound familiar, at least not the one on the block. Ford's casting numbers always start with a letter, those may have been check numbers or something like that. Unless the heads are GT40's, the only place to find the number on those is on the bottom/underside on the intake/pushrod side.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
04-20-2011, 09:40 PM | #26 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
ok ill have to check again tomorrow...so those rockers were stock on cobra motors? the guy i bought it from said he thought the motor was out of a cobra..but he really didnt know alot about the car...much like me!!! but when im done with it, it will be right
__________________
87 notchback....and a few mods |
04-21-2011, 04:05 PM | #27 | |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Quote:
....hope this helps.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
|
04-22-2011, 06:23 PM | #28 |
Member
Join Date: Apr 2011
Location: montgomery alabama
Posts: 34
|
your pics helped out alot... they are not gt40 heads according to the pic... the only block # i found was punched on hte back of the block where the bellhousing bolts up to.. the # was d484t.. tried looking it up and nothing...im at a loss for words.. its pissing me off
__________________
87 notchback....and a few mods |
|
|