10-06-2006, 06:33 PM | #1 |
Friends
Join Date: Dec 2004
Location: Southern Colorado
Posts: 2,452
|
New Connectors?
Anyone know where I might could find new connectors for the headlight and hazard switch? The ones in my dash harness wires come out of the connectors when trying to remove them, without putting any pressure on the wires.
If not, any recomendations to keep them from popping out so easy? Last edited by joker; 10-06-2006 at 06:58 PM. |
10-06-2006, 08:43 PM | #2 |
Member
Join Date: Feb 2006
Posts: 68
|
I think you can get a headlight switch pigtail from 5.0 resto. IM not sure about the other one.
|
10-07-2006, 01:48 AM | #3 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
try fordfuelinjection.com
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
10-19-2006, 01:45 PM | #4 |
Member
Join Date: Aug 2005
Posts: 72
|
joker,
Those retaining clips are wimps especially after 20+ years. I put a tie wrap real close to the connector body, seems to keep the wires in there. Map out all the wire colors before messing with them...it is a bear to figure this out from the books, it took me 1/2day on mine. Good Luck, Don |
10-19-2006, 01:47 PM | #5 | |
Friends
Join Date: Dec 2004
Location: Southern Colorado
Posts: 2,452
|
Quote:
|
|
10-19-2006, 02:36 PM | #6 | |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Quote:
Damn electrical issues with these cars. They never end. Can this be closed then?
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
|
10-19-2006, 04:05 PM | #7 |
Friends
Join Date: Dec 2004
Location: Southern Colorado
Posts: 2,452
|
|
10-19-2006, 05:32 PM | #8 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
There is no need to close the thread
|
|
|