Problem with new valvesprings/retainers CRANE - Page 2

ncontt · 03-21-2013, 08:50 AM

http://www.cranecams.com/bulletins_listview.php?s_id=23

that seems to reference the parts I need.... 99906-1 going to run to summit and see if that will do the trick, I'm ready to get this motor into his fairmont and get it going so I can move onto mine!!!

ncontt · 03-21-2013, 08:51 AM

http://www.summitracing.com/parts/cr...1/media/images

93cobra1928 · 03-21-2013, 04:17 PM

Quote:

Originally Posted by QWKSNKE

Was this specific to the P heads? I don't recall my cobra heads being that way

Yes, as far as I can remember.

ncontt · 03-21-2013, 10:23 PM

I got the crane locks that are -.050 and installed one of them and it looks like it will sit right at the install height of 1.94" so at the risk of jinxing myself I think I may have this little bastard whipped...on to the next huge ordeal...thanks everyone for pointing me in the right direction!

ncontt · 04-02-2013, 08:31 PM

The Crane -.050 locks did the trick...all we need now for his motor/trans is a converter and valvebody, inline fuel pump, and a few little nick nack things....oh that and some time to work on it..

03-21-2013, 08:50 AM	#11
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	http://www.cranecams.com/bulletins_listview.php?s_id=23 that seems to reference the parts I need.... 99906-1 going to run to summit and see if that will do the trick, I'm ready to get this motor into his fairmont and get it going so I can move onto mine!!! __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

03-21-2013, 08:51 AM	#12
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	http://www.summitracing.com/parts/cr...1/media/images __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

03-21-2013, 10:23 PM	#14
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	I got the crane locks that are -.050 and installed one of them and it looks like it will sit right at the install height of 1.94" so at the risk of jinxing myself I think I may have this little bastard whipped...on to the next huge ordeal...thanks everyone for pointing me in the right direction! __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

04-02-2013, 08:31 PM	#15
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	The Crane -.050 locks did the trick...all we need now for his motor/trans is a converter and valvebody, inline fuel pump, and a few little nick nack things....oh that and some time to work on it.. __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~