Max RWHP for 2V on stock bottom end - Page 2

The Rock 326 · 02-02-2006, 04:29 PM

Quote:

Originally Posted by DSkeet

I know this is kind of off topic, but what do you guys think my setup will be doing on stock internals?
-Procharger D1SC intercooled at 10 psi
-Anderson power pipe
-Accufab 75mm TB
-C&L upper plenum
-x pipe
-exhaust
-tuned with Diablosport
I have been told to run a conservative tune going with the 10 lb pulley and not to go into high rpms...

You're gonna blow it up!

TheJeanyus · 02-02-2006, 04:30 PM

Quote:

Originally Posted by QWKSNKE

Depends on your tune which leads to my question of...... Why the predator and who is going to tune your car with a predator?

He didn't say it was a Predator...Diablo makes multi-program chips, too.

DSkeet · 02-02-2006, 04:31 PM

Quote:

Originally Posted by QWKSNKE

Depends on your tune which leads to my question of...... Why the predator and who is going to tune your car with a predator?

Sorry let me rephrase that, I didn't mean an actual "tune", I just need someone to go through and set everything up for me, I don't really know where to set everything at.

TheJeanyus · 02-02-2006, 04:37 PM

Quote:

Originally Posted by DSkeet

Sorry let me rephrase that, I didn't mean an actual "tune", I just need someone to go through and set everything up for me, I don't really know where to set everything at.

This will require much more tuning than an end user can do with a Predator, if that's what you mean. The Predator leaves VERY little room for user adjustment. We leaned my car out as far as it would go, and the A/F barely even changed at all (still off the chart rich after about 4500 rpms

). If you're going the Diablo route, I'd get someone like Doug to tune it for you - he's done two 2V + S/C setups lately and I'm sure he'll be able to get yours tuned up right.

QWKSNKE · 02-02-2006, 04:47 PM

Can Doug do Diablo programming. I thought it was only SCT items he did?

Yeah David, you cannot tune your car with the predator as an enduser. Somebody who can unlock the predator (such as a tuner/dealer only can do that)

You can only adjust tables by 10% or so off the base file which is not enough if you have a predator for a n/a car

DSkeet · 02-02-2006, 05:57 PM

So do I need to send it back and get something else?? The guy I bought the kit from said that there is an SCT chip tuned for the 15 lb pulley. I know that wouldn't work since I am running the 10 lb pulley... Would that be in the new ecm that came with my kit?? If that's the case do I just need a chip to install into that and not get a handheld programmer?

QWKSNKE · 02-02-2006, 08:08 PM

Do you already have a predator? If so who did you buy it from?

1sicklx · 02-02-2006, 08:50 PM

Quote:

Originally Posted by QWKSNKE

Can Doug do Diablo programming. I thought it was only SCT items he did?

BamaChips only uses the SCT software.

DSkeet · 02-03-2006, 05:54 AM

I already ordered it. Joe Blow racing had it for $339, everywhere else seems to be stuck on $399.

QWKSNKE · 02-03-2006, 07:08 AM

did you tell them it was for a supercharged 2002 GT?

If you didn't, that programmer will be worthless to you when it gets here

02-02-2006, 04:47 PM	#15
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Max RWHP for 2V on stock bottom end Can Doug do Diablo programming. I thought it was only SCT items he did? Yeah David, you cannot tune your car with the predator as an enduser. Somebody who can unlock the predator (such as a tuner/dealer only can do that) You can only adjust tables by 10% or so off the base file which is not enough if you have a predator for a n/a car __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-02-2006, 05:57 PM	#16
DSkeet IDK Join Date: Dec 2004 Location: Jacksonville, AL Posts: 1,136	Re: Max RWHP for 2V on stock bottom end So do I need to send it back and get something else?? The guy I bought the kit from said that there is an SCT chip tuned for the 15 lb pulley. I know that wouldn't work since I am running the 10 lb pulley... Would that be in the new ecm that came with my kit?? If that's the case do I just need a chip to install into that and not get a handheld programmer? __________________ --2005 Chevrolet Corvette C6 Z51-- --2007 Lexus GS350 AWD-- --1958 Plymouth Belvedere aka "Christine"--

02-02-2006, 08:08 PM	#17
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Max RWHP for 2V on stock bottom end Do you already have a predator? If so who did you buy it from? __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-03-2006, 05:54 AM	#19
DSkeet IDK Join Date: Dec 2004 Location: Jacksonville, AL Posts: 1,136	Re: Max RWHP for 2V on stock bottom end I already ordered it. Joe Blow racing had it for $339, everywhere else seems to be stuck on $399.

02-03-2006, 07:08 AM	#20
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Max RWHP for 2V on stock bottom end did you tell them it was for a supercharged 2002 GT? If you didn't, that programmer will be worthless to you when it gets here __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy