08-30-2006, 08:49 PM | #1 |
Junior Member
Join Date: Mar 2006
Posts: 29
|
Replacing the Factory O2's with WB O2's
I am looking at getting the Basic LC-1 wb O2 to run through the EGR.
(only one wideband, which would run along side the 2 stockers) Is there any advantage to replacing the stock O2's with widebands, using the narrowband simulation? Is there better resolution with the wideband when it is simulating a narrowband? I'm sure this has been covered before, but I haven't really found anything that covered this aspect of a wb O2 sensor. Thanks, jason
__________________
Check out my new Mustang website! - Including: TwEECer, EEC-IV, C&L, 351w Fox Swaps, PCV Oil Control, and more. 1990 GT - 408w - 17mpg TwEECer RT 1.30A10 - X3Z - A9L strat. / EA Forged Bottom End / Gapless Rings / CR 8.85:1 / Custom Cam / Ported Trick Flow Heads / Comp Cam Upr / Lightning Lwr 17x9 Cobras / Front 255s / Rear 275s / 5 Lug Cobra Disc Conversion / Auburn Ltd. Slip / 3.27 / 31 spline axles / Panhard Rod / Upr&Lwr Control Arms 1987 Red LX - 2.3L - Planning 2.3t Converison |
08-31-2006, 05:59 AM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
I don't think so. Not to mention the w/b's are a lot more expensive
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
08-31-2006, 12:36 PM | #3 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
It would be ideal, but I don't know if the A9L and Tweecer can deal with it. The voltage range is going to give totally different readings.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
09-02-2006, 01:25 PM | #4 |
Member
Join Date: Aug 2005
Posts: 72
|
vristang,
I have the LM-1 and originally tried using the WBO2 instead of the stock O2 in the stock location. It worked but unfortunately the stock location was too hot for the WBO2 (at least w/o a heatsink) and after a few minutes of running down the road the WB02 went brain dead and the vehicle went into limp mode...major bummer! So I don't recommend it, but it can be done. You just run the WBO2 signal through the EGR or DataQ and the second channel to the stock O2 connector to the PCM. Don Last edited by gt90stang; 09-02-2006 at 01:30 PM. Reason: added connection info. |
09-05-2006, 06:46 AM | #5 |
The Kocky One
Join Date: Dec 2004
Location: Yeah, but those cutters won't bust any walnuts.â„¢
Posts: 1,948
|
Will you get an advantage doing it? No, not really. EEC only cares about narrowband resolution. Some of the wideband controllers emulate narrowband resolution. The only true advantage to doing that is it keeps you from drilling/tapping a new O2 sensor location in your pipe.
The EEC can't take advantage of the wideband signal, it doesn't have the programming capability to do so. However, if you have a computer than can take advantage of the widebands (such as the AEM system) then you can use the wideband input to actually LEARN WOT fuel and part throttle fuel...
__________________
For Sale: Reproduction Window Stickers, 87+ Mustangs, Cobras, Lightnings, and HD F150! Richard White 93 Cobra Kocky will be back! |
09-08-2006, 10:52 PM | #6 |
Junior Member
Join Date: Mar 2006
Posts: 29
|
That is what I fugured.
I guess I have to decide how to use the wb, and where to mount it. Thanks for all the responses! jason
__________________
Check out my new Mustang website! - Including: TwEECer, EEC-IV, C&L, 351w Fox Swaps, PCV Oil Control, and more. 1990 GT - 408w - 17mpg TwEECer RT 1.30A10 - X3Z - A9L strat. / EA Forged Bottom End / Gapless Rings / CR 8.85:1 / Custom Cam / Ported Trick Flow Heads / Comp Cam Upr / Lightning Lwr 17x9 Cobras / Front 255s / Rear 275s / 5 Lug Cobra Disc Conversion / Auburn Ltd. Slip / 3.27 / 31 spline axles / Panhard Rod / Upr&Lwr Control Arms 1987 Red LX - 2.3L - Planning 2.3t Converison |
|
|