10-03-2010, 09:07 PM | #1 |
Senior Member
Join Date: Mar 2010
Location: Oneonta, Alabama
Posts: 401
|
Main Girdle help please!?
I have a probe industries 351w street fighter main girdle kit to put on my car my problem is it comes with one stud shorter than the rest I don't know exactly where it goes Im thinking right under the oil pump but not sure, and my second problem is when I screw the studs all the way in until they bottom out the threads on some of the studs are not long enough to start the nut. Also I tried to find the torque specs on the studs but the only kind of torque specs that probe industries has on there website is 115 in. lbs. for studs with oil. Is that right just 115 in. lbs. or is it supposed to be 115 ft. lbs.? I would be kind of scared to run any motor with only 9.5 to 10 ft. lbs. holding the main caps down isn't that what 115 in. lbs. comes out to in ft. lbs. Any help is appreciated.
http://www.probeindustries.com/Produ...Show=TechSpecs |
10-04-2010, 10:21 AM | #2 |
Senior Member
Join Date: Mar 2010
Location: Oneonta, Alabama
Posts: 401
|
I called probe this morning they said it's 115 ft. Lbs. That the torque specs where wrong on the website.
|
10-04-2010, 01:28 PM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
It has been so long since I fooled with one of those, i couldn't remember but like you, I knew it was more than 115 in lb but I didn't realize it was 115 ft lbs
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
10-04-2010, 01:41 PM | #4 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
The short one goes on cap #1 and it is to clear the oil-pump and/or pickup.
|
10-04-2010, 01:44 PM | #5 |
Senior Member
Join Date: Mar 2010
Location: Oneonta, Alabama
Posts: 401
|
|
10-04-2010, 02:00 PM | #6 |
Senior Member
Join Date: Mar 2010
Location: Oneonta, Alabama
Posts: 401
|
|
|
|