Finally

slvrbullit · 01-07-2005, 06:16 AM

After a 10 hour ordeal with removing the intake and putting the end seals in it finally runs. Reason for the 10 hour R/R was some problems occured with reassembly, one of the intake bolts screwed up the heli coil in the head and we had to redo it 4 times and finally got one to stay without pulling out. Then onto the next order of business, exhaust leaks, NEVER NEVER NEVER use the Mr Gasket Copper header gaskets, these damn things did not seal up at the tops on the header side. I will post pics of them when I get back from work this after noon. Stuck some good ole Felpro's on it and no leaks after fighting with the POS MAC headers flanges.

Been up for over 24 hours now and have to go to work...............pics will follow later.

EZ SPEED · 01-07-2005, 06:59 AM

WTG Tommy

Scothew · 01-07-2005, 07:09 AM

good job Tommy!

Craig K. · 01-07-2005, 07:14 AM

Well atleast it's done now!

banditmwp · 01-07-2005, 08:10 AM

Bet you're tired, huh?

Congrats on getting it done.

TheJeanyus · 01-07-2005, 08:56 AM

Congrats on getting it finished - it'll all be worth the lack of sleep as soon as you get her out on the road.

EZ SPEED · 01-07-2005, 10:10 AM

BTW: Spend about another 2 hours cleaning up all that crap around you car..than shoot another video

j/k

CrimsonRacing · 01-07-2005, 10:54 AM

See..............leave the

..and you'll get it done quicker......

Glad you got it finished Tommy........

The Rock 326 · 01-07-2005, 11:20 AM

Good job Tommy.

96GTS · 01-07-2005, 01:21 PM

01-07-2005, 06:16 AM	#1
slvrbullit Super Moderator Join Date: Dec 2004 Location: on the water Posts: 1,280	Finally After a 10 hour ordeal with removing the intake and putting the end seals in it finally runs. Reason for the 10 hour R/R was some problems occured with reassembly, one of the intake bolts screwed up the heli coil in the head and we had to redo it 4 times and finally got one to stay without pulling out. Then onto the next order of business, exhaust leaks, NEVER NEVER NEVER use the Mr Gasket Copper header gaskets, these damn things did not seal up at the tops on the header side. I will post pics of them when I get back from work this after noon. Stuck some good ole Felpro's on it and no leaks after fighting with the POS MAC headers flanges. Been up for over 24 hours now and have to go to work...............pics will follow later. __________________ 2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles

01-07-2005, 06:59 AM	#2
EZ SPEED Friends Join Date: Dec 2004 Location: Tempe Arizona Posts: 3,029	Re: Finally WTG Tommy

01-07-2005, 07:09 AM	#3
Scothew Censored Jihad Join Date: Dec 2004 Location: B'ham, AL Posts: 4,108	Re: Finally good job Tommy! __________________ Theres only one way to get to Carnegie Hall..... .... Practice.

01-07-2005, 07:14 AM	#4
Craig K. Nothing new here Join Date: Dec 2004 Location: Senoia, GA Posts: 2,990	Re: Finally Well atleast it's done now!

01-07-2005, 08:10 AM	#5
banditmwp Welcome to America! Join Date: Dec 2004 Location: in the 11's Posts: 4,501	Re: Finally Bet you're tired, huh? Congrats on getting it done. __________________ 91 GT Convertible 2006 Nissan Titan LE Crew Cab 2014 Peterbilt 337/Marion 22' box

01-07-2005, 08:56 AM	#6
TheJeanyus Administrator Join Date: Dec 2004 Location: Huntsville, AL Posts: 14,774	Re: Finally Congrats on getting it finished - it'll all be worth the lack of sleep as soon as you get her out on the road. __________________ 1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI

01-07-2005, 10:10 AM	#7
EZ SPEED Friends Join Date: Dec 2004 Location: Tempe Arizona Posts: 3,029	Re: Finally BTW: Spend about another 2 hours cleaning up all that crap around you car..than shoot another video j/k

01-07-2005, 10:54 AM	#8
CrimsonRacing Comfortably NUMB Join Date: Dec 2004 Location: ALIVE AGAIN Posts: 1,704	Re: Finally See..............leave the ..and you'll get it done quicker...... Glad you got it finished Tommy........ __________________ '02 GT....just another money pit.

01-07-2005, 11:20 AM	#9
The Rock 326 Friends Join Date: Dec 2004 Posts: 908	Re: Finally Good job Tommy. __________________ 02 GT S/C'd 406WHP/382WTQ 94 Explorer XLT

01-07-2005, 01:21 PM	#10
96GTS Mine's bigger... Join Date: Dec 2004 Location: SoCal Posts: 1,060	Re: Finally __________________ 323rwhp \| 320rwtq - 4VNA 12.13 @ 113.36 \| 1.63 60'