351 5.8 Flywheel 28 oz

jonosranger · 07-16-2009, 10:38 AM

Is there a stock production flywheel (or does anybody have one?) that i can buy to bolt up to my 351 with a 28oz balance for my 10.5 spec stage 3 clutch in front of my tremec 3550? Any info would be helpful. I dont want to go out and spend $500 on a flywheel. I am just looking for something that will work for now cause i have to go spend $650 on stuff for my motor.

Thanks, Jonathan

coupe · 07-16-2009, 10:57 AM

The 351W flywheels will be 164 tooth and probably have an 11" pressure plate pattern. An early 289-302 flywheel would be the right size and balance, but it will have a pressure plate pattern for a 10" clutch.

Best bet is to get an aftermarket piece... and it isn't anywhere near $500.
I can get you one for around $220. Billet Steel, 28oz...interchangable weight so you can use it on "zero" or 50oz balance motors too.

There are cheaper ones online, but I'm not sure who makes them or how good they are.

Lemme know.

jonosranger · 07-16-2009, 11:09 AM

Thats wat i was thinkin. Wat Brand is that?

EHardy1971 · 07-16-2009, 11:14 AM

I suggest picking one up from Coupe,BUT if you want to try an auto parts store,have them look one up for a '95 Cobra R.

93cobra1928 · 07-16-2009, 06:42 PM

$53.99 at Advance Auto Parts

07-16-2009, 10:38 AM	#1
jonosranger Boost! Its wats 4 dinner Join Date: Mar 2009 Location: Bridgeport,AL Posts: 811	351 5.8 Flywheel 28 oz Is there a stock production flywheel (or does anybody have one?) that i can buy to bolt up to my 351 with a 28oz balance for my 10.5 spec stage 3 clutch in front of my tremec 3550? Any info would be helpful. I dont want to go out and spend $500 on a flywheel. I am just looking for something that will work for now cause i have to go spend $650 on stuff for my motor. Thanks, Jonathan __________________ 06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD

07-16-2009, 10:57 AM	#2
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	The 351W flywheels will be 164 tooth and probably have an 11" pressure plate pattern. An early 289-302 flywheel would be the right size and balance, but it will have a pressure plate pattern for a 10" clutch. Best bet is to get an aftermarket piece... and it isn't anywhere near $500. I can get you one for around $220. Billet Steel, 28oz...interchangable weight so you can use it on "zero" or 50oz balance motors too. There are cheaper ones online, but I'm not sure who makes them or how good they are. Lemme know. __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

07-16-2009, 11:09 AM	#3
jonosranger Boost! Its wats 4 dinner Join Date: Mar 2009 Location: Bridgeport,AL Posts: 811	Thats wat i was thinkin. Wat Brand is that? __________________ 06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD

07-16-2009, 11:14 AM	#4
EHardy1971 Trunk Monkey Join Date: Jun 2007 Location: Home Posts: 5,708	I suggest picking one up from Coupe,BUT if you want to try an auto parts store,have them look one up for a '95 Cobra R. __________________ Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS

07-16-2009, 06:42 PM	#5
93cobra1928 Dazed and Confused Join Date: Mar 2009 Location: Northport, Al Posts: 778	$53.99 at Advance Auto Parts __________________ Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards