|
10-05-2009, 08:54 PM
|
#1 |
|
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
gt 40 head intake?
hey guys which after market carb intakes match up good on gt40 heads for 300 to 350 hp weekend cruiser?thx clyde ps lower rpm power and torque.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
|
|
|
10-06-2009, 03:49 AM
|
#2 |
|
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
I would think a Edelbrock performer RPM and either a 600 or 650 holley square bore double pumper would do good.
The RPM is for 1500-6500 RPM. If you wanted to go a little less get the Edelbrock performer 289 which is idle -6000 rpm (as i recall) and the 600 cfm. I am assuming you are running a stock cam?
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS |
|
|
|
|
10-06-2009, 07:32 AM
|
#3 |
|
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Also, Weiand has a couple really nice dual-plane designs that make good power.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
|
|
|
|
10-06-2009, 03:27 PM
|
#4 |
|
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
thx will be stock cam or little bigger on a dss 331 with flat tops
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
|
|
|
|
10-06-2009, 03:52 PM
|
#5 | |
|
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
A 650 DP like Craig said should be plenty.
Quote:
 The Stealth has a REAL good powerband!
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
|
|
|
|
 |
|
|
Linear Mode
