Driveshaft safety loop

rtusnake · 05-24-2005, 06:38 PM

Anyone have any pics of theirs installed? I have a hpr one I believed its called. I don't see any way you can get it in there without taking out the driveshaft.

QWKSNKE · 05-24-2005, 07:08 PM

if it is a 1 piece, you will need to remove the driveshaft

rtusnake · 05-24-2005, 07:26 PM

Its the two piece design. Its not hpr its hpm. Its the one in the ford racing catalog.

Wall96cobra · 05-24-2005, 07:39 PM

Mine is a 4-piece lakewood, I installed it when I was putting my car back together so the driveshaft was not in yet but it could have been installed with the driveshaft still in place. I could see where a 2-piece would cause a problem though so I'd think the driveshaft would have to come out or atleast taken loose from the rearend.

ujslost · 05-24-2005, 09:13 PM

I put one in a buddys car was a 4 piece lake wood and we didnt have to take the DS out, its an aluminum DS dont know if that makes a differance

QWKSNKE · 05-25-2005, 04:53 AM

yeah the lakewood d/s loop doesn't require removal but if rtu's is a 2 piece his will require d/s removal

05-24-2005, 06:38 PM	#1
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	Driveshaft safety loop Anyone have any pics of theirs installed? I have a hpr one I believed its called. I don't see any way you can get it in there without taking out the driveshaft.

05-24-2005, 07:08 PM	#2
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Driveshaft safety loop if it is a 1 piece, you will need to remove the driveshaft __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

05-24-2005, 07:26 PM	#3
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	Re: Driveshaft safety loop Its the two piece design. Its not hpr its hpm. Its the one in the ford racing catalog.

05-24-2005, 07:39 PM	#4
Wall96cobra ooooo cake!!! Join Date: Dec 2004 Location: Saks, AL Posts: 1,630	Re: Driveshaft safety loop Mine is a 4-piece lakewood, I installed it when I was putting my car back together so the driveshaft was not in yet but it could have been installed with the driveshaft still in place. I could see where a 2-piece would cause a problem though so I'd think the driveshaft would have to come out or atleast taken loose from the rearend.

05-24-2005, 09:13 PM	#5
ujslost Senior Member Join Date: May 2005 Location: ALBERTVILLE, AL Posts: 498	Re: Driveshaft safety loop I put one in a buddys car was a 4 piece lake wood and we didnt have to take the DS out, its an aluminum DS dont know if that makes a differance

05-25-2005, 04:53 AM	#6
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Driveshaft safety loop yeah the lakewood d/s loop doesn't require removal but if rtu's is a 2 piece his will require d/s removal __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy