1994 Mustang GT - Page 2

Craig K. · 02-18-2011, 06:48 PM

Pretty sure that is Richards car, a lot of work went into it.

You can replace the odo gears, there is a guy that makes them (i think in Virgina).
DO a search on it, we have talked about it on here a few times.

CrimsonRacing · 02-18-2011, 07:01 PM

Yep......................that's my old GT............I miss that car......

the valve covers must have been changed and the intake spacer removed because the cowl hood is gone.........

Still looks good...........

QWKSNKE · 02-18-2011, 07:35 PM

Quote:

Originally Posted by CrimsonRacing

Yep......................that's my old GT............I miss that car......

the valve covers must have been changed and the intake spacer removed because the cowl hood is gone.........

Still looks good...........

and my old car

Latemodelresto engine? What happened to the engine we built for the car Richard?

RedSuperRanger23 · 02-18-2011, 07:46 PM

Quote:

Originally Posted by CrimsonRacing

Yep......................that's my old GT............I miss that car......

the valve covers must have been changed and the intake spacer removed because the cowl hood is gone.........

Still looks good...........

I saw the pics that John had of it with the cowl hood and he said that the Flowmasters were just too loud for him...

Quote:

Originally Posted by QWKSNKE

and my old car

Latemodelresto engine? What happened to the engine we built for the car Richard?

Im just going by the list that John gave me of mods.

I'd love to get together with both of you so y'all can enlighten me on what I might not know about it.

QWKSNKE · 02-18-2011, 08:01 PM

I bought the car late 03 from MPS in Winder, Ga. During my ownership, I installed a heater core and carpet. I barely drove it. I bought it to build a turbo street/heavy strip car out of it. Lost interest and traded to Richard in 04 I think.

In 2009 ( I think), myself and another guy that used to post here built a 306 with all the stuff you have in your mod list for it. So unless John put another shortblock in it, we did all the engine work to it.

RedSuperRanger23 · 02-18-2011, 08:06 PM

I really hope that its still the 306 you built and not some LRS crate engine. its painted Ford Blue and it has the Mustang Powered by Ford valve covers on it, the filler has an elbow welded on to it to clear the intake manifold though.

rtusnake · 02-18-2011, 09:06 PM

I worked on it some as well, can't remember what though

Believe it was the springs

QWKSNKE · 02-18-2011, 09:29 PM

Quote:

Originally Posted by RedSuperRanger23

I really hope that its still the 306 you built and not some LRS crate engine. its painted Ford Blue and it has the Mustang Powered by Ford valve covers on it, the filler has an elbow welded on to it to clear the intake manifold though.

That sounds like the engine we did. the block that Richard bought (or that we bought for him) had been painted blue by the machinist.
Sounds like he changed the covers out.

RedSuperRanger23 · 02-18-2011, 09:35 PM

Quote:

Originally Posted by Craig K.

Pretty sure that is Richards car, a lot of work went into it.

You can replace the odo gears, there is a guy that makes them (i think in Virgina).
DO a search on it, we have talked about it on here a few times.

LRS has them for $35 for both gears or odometergears.com has them for $25 each. Im gonna get an order up and get it all at one time...

Craig K. · 02-19-2011, 05:36 PM

Quote:

Originally Posted by RedSuperRanger23

LRS has them for $35 for both gears or odometergears.com has them for $25 each. Im gonna get an order up and get it all at one time...

I bought mine from odometergears.com in about 2004 (IIRC) have worked just fine since then.

Hey I worked on that car too, Richard, Tommy and I put the intake on the original engine (also about 2004 or so).

02-18-2011, 06:48 PM	#11
Craig K. Nothing new here Join Date: Dec 2004 Location: Senoia, GA Posts: 2,990	Pretty sure that is Richards car, a lot of work went into it. You can replace the odo gears, there is a guy that makes them (i think in Virgina). DO a search on it, we have talked about it on here a few times. __________________ 1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS

02-18-2011, 07:01 PM	#12
CrimsonRacing Comfortably NUMB Join Date: Dec 2004 Location: ALIVE AGAIN Posts: 1,704	Yep......................that's my old GT............I miss that car...... the valve covers must have been changed and the intake spacer removed because the cowl hood is gone......... Still looks good........... __________________ '02 GT....just another money pit.

02-18-2011, 08:01 PM	#15
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	I bought the car late 03 from MPS in Winder, Ga. During my ownership, I installed a heater core and carpet. I barely drove it. I bought it to build a turbo street/heavy strip car out of it. Lost interest and traded to Richard in 04 I think. In 2009 ( I think), myself and another guy that used to post here built a 306 with all the stuff you have in your mod list for it. So unless John put another shortblock in it, we did all the engine work to it. __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-18-2011, 08:06 PM	#16
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	I really hope that its still the 306 you built and not some LRS crate engine. its painted Ford Blue and it has the Mustang Powered by Ford valve covers on it, the filler has an elbow welded on to it to clear the intake manifold though. __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

02-18-2011, 09:06 PM	#17
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	I worked on it some as well, can't remember what though Believe it was the springs __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")