08-12-2005, 02:49 PM | #1 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Does TwEECer support...
low impedence injectors? Is there a way to drive them via tweecer? I'm specifically curious to what the max/min pulse-width values could be?
Thanks
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
08-12-2005, 02:58 PM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: Does TwEECer support...
No i don't believe so
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
08-13-2005, 07:31 AM | #3 |
Member
Join Date: May 2005
Posts: 47
|
Re: Does TwEECer support...
It's a hardware problem, not the tweecer, the stock eec can't drive low imp injectors without damage. There is a company called "acceleronics" I think that makes an adaptor to run the injectors and works on any car.
Bob
__________________
1996 GT, forged parts, vortech, ZXA3 processor, etc. |
08-13-2005, 07:34 AM | #4 |
Member
Join Date: May 2005
Posts: 47
|
Re: Does TwEECer support...
Found it.
http://www.acceleronics.com
__________________
1996 GT, forged parts, vortech, ZXA3 processor, etc. |
08-13-2005, 10:42 AM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: Does TwEECer support...
Bob, I take it that the Tweecer can be used in conjunction with this.
Also they claim that all injectors that are larger than 55's are low impedance. I have never heard that. Does this mean my Sieman 60's are low imp instead of high imp.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
08-13-2005, 11:56 AM | #6 |
Member
Join Date: May 2005
Posts: 47
|
Re: Does TwEECer support...
Yes, the tweecer will work with it. It's true that most injectors bigger than 50's are low imp, but now there are 60's available in high imp. so I'm pretty sure yours are ok.
BTW, when you put those 60's in the car you will probably find the car runs really rich and changing inj slopes will not be enough. Use the "batt inj comp volt" function to correct this by reducing the numbers in the function. Bob
__________________
1996 GT, forged parts, vortech, ZXA3 processor, etc. |
|
|