04-02-2009, 05:42 PM | #1 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
needing a good driveshaft
i have a vibration and i have replaced everything but he drive shaft i need a good driveshatf i would like to get an aluminum one but stock is fine too u joints dont matter as long as the shaft is good and straight post up you offers
thanks! taylor
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
04-02-2009, 06:11 PM | #2 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
I have one in the closet you can try. or buy. aluminum. Near new. PM me.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
04-02-2009, 06:35 PM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
aluminum is the only way you will get rid of vibrations
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
04-02-2009, 07:24 PM | #4 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
He has the 31-spline output shaft Tremec 600 IIRC... so the regular T5, 3550, etc.. driveshafts won't work.
Best bet is probably get a FMS driveshaft and call Tremec for the 31-spline front yoke.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
04-02-2009, 07:30 PM | #5 |
Senior Member
Join Date: Oct 2007
Posts: 184
|
nope
do not buy into the myth of alum shafts though they are nice looking have you tried reclocking the shaft ? try one from an automatic car with the weight/not strictly and auto but most were found on them. If you were close I have several to try and a custom chromoly good for over 1k hp |
04-02-2009, 07:32 PM | #6 |
Senior Member
Join Date: Oct 2007
Posts: 184
|
|
04-02-2009, 07:44 PM | #7 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
But if what you say is true about the auto cars I wouldn't know. I have only done 1 gear install for a auto car
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
04-02-2009, 08:18 PM | #8 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
ok i have a stock driveshaft with a tko yoke with the correct pline the car is running and driving so all the parts are there i just need a good driveshaft to put my yolk and ujoints in (they are brand new) pm sent svo brown and bad int
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
04-02-2009, 10:34 PM | #9 | |
Senior Member
Join Date: Oct 2007
Posts: 184
|
Quote:
|
|
04-03-2009, 05:45 AM | #10 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
I took mine off the TC I had. It was great except in deceleration. Always had a roar.
I'll give you a call this weekend. We will see if it will work.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
|
|